VWPP – Wheel and caster series

Wheels and casters with “Blickle Soft” soft rubber tires and synthetic rim

The rim of the VWPP soft rubber series is made from polypropylene, while the cast tire is made from the highly elastic soft rubber “Blickle Soft”. With a round profile and a hardness of 50 Shore A, the tires provide a high level of operational comfort and good floor preservation.

VWPP wheels and casters are used for any application where attenuating vibration is particularly important. This includes sensitive measuring equipment, transport trolleys and applications in the glass industry. The series is also suitable for use in wet areas. Because it is puncture-proof, this series is also frequently used as a replacement for pneumatic tires.

  • VWPP – Wheels

    The VWPP wheel series have diameters ranging between 4 ¹⁵⁄₁₆ and 10 ¹⁄₄ inch as standard and come with a ball bearing, roller bearing or plain bore. The wheels are also available with a non-marking gray tire.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Axle bore Ø

    [inch]
    Hub
    length
    [inch]
    VWPP 125/12G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 110 plain bore ¹⁄₂ 1 ²⁵⁄₃₂
    VWPP 125/12R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 110 roller bearing ¹⁄₂ 1 ²⁵⁄₃₂
    VWPP 160/20G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 155 plain bore ¹³⁄₁₆ 2 ³⁄₈
    VWPP 160/20R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 155 roller bearing ¹³⁄₁₆ 2 ³⁄₈
    VWPP 200/20G 8 2 220 plain bore ¹³⁄₁₆ 2 ³⁄₈
    VWPP 200/20R 8 2 220 roller bearing ¹³⁄₁₆ 2 ³⁄₈
    VWPP 250/25G 10 2 ³⁄₈ 355 plain bore 1 2 ⁹⁄₁₆
    VWPP 250/25R 10 2 ³⁄₈ 355 roller bearing 1 2 ⁹⁄₁₆
    VWPP 260/20G 10 ¹⁄₄ 3 ³⁄₈ 440 plain bore ¹³⁄₁₆ 3
    VWPP 260/20R 10 ¹⁄₄ 3 ³⁄₈ 440 roller bearing ¹³⁄₁₆ 3
    VWPP 260/20K 10 ¹⁄₄ 3 ³⁄₈ 440 ball bearing ¹³⁄₁₆ 3
  • VWPP – Swivel casters with plate

    As standard, the wheels in the VWPP series are available with the following rig series with top plate fitting:

    L series: Pressed steel swivel rig with top plate fitting, medium duty design

    A detailed description of this rig is available in the guide. The brake systems available for each base product are listed in the relevant section.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    L-VWPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 110 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-VWPP 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 110 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-VWPP 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 155 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    L-VWPP 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 155 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    L-VWPP 200G 8 2 220 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    L-VWPP 200R 8 2 220 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    L-VWPP 250G-3 10 2 ³⁄₈ 355 plain bore 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₁₆
    L-VWPP 250R-3 10 2 ³⁄₈ 355 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₁₆
    L-VWPP 260G 10 ¹⁄₄ 3 ³⁄₈ 440 plain bore 12 ¹⁄₈ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 3 ¹⁄₁₆
    L-VWPP 260R 10 ¹⁄₄ 3 ³⁄₈ 440 roller bearing 12 ¹⁄₈ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 3 ¹⁄₁₆
    L-VWPP 260K 10 ¹⁄₄ 3 ³⁄₈ 440 ball bearing 12 ¹⁄₈ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 3 ¹⁄₁₆
  • VWPP – Rigid casters

    Blickle also provides corresponding casters with rigid rigs:

    B series: Pressed steel rigid rig with top plate fitting, medium duty design
    BH series: Pressed steel rigid rig with top plate fitting, heavy duty design

    A detailed description of the rig series is available in our guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    B-VWPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 110 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-VWPP 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 110 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-VWPP 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 155 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-VWPP 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 155 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-VWPP 200G 8 2 220 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-VWPP 200R 8 2 220 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BH-VWPP 250G 10 2 ³⁄₈ 355 plain bore 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BH-VWPP 250R 10 2 ³⁄₈ 355 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-VWPP 260G 10 ¹⁄₄ 3 ³⁄₈ 440 plain bore 12 ¹⁄₈ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32
    B-VWPP 260R 10 ¹⁄₄ 3 ³⁄₈ 440 roller bearing 12 ¹⁄₈ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32
    B-VWPP 260K 10 ¹⁄₄ 3 ³⁄₈ 440 ball bearing 12 ¹⁄₈ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32