Rig types

Swivel and rigid casters rig types

This page provides a comprehensive overview of all of the swivel rig series in the Blickle range. Use this page to compare designs and materials, compatible brake systems and the different versions and options available for each rig series.

  • Pressed steel swivel rig for light-duty casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LRA-LKRA
    LPA-LKPA
    LMDA
    LDA
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LRA / LKRA – light-duty swivel rig with bolt hole
    1 3/8″–6″ (35–150 mm)
    up to 330 lbs (150 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    synthetic “stop-fix” brake lever for series LRA, steel brake lever for series LKRA
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    BRA, BKRA
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LPA / LKPA – light-duty swivel rig with top plate
    1 3/8″–6″ (35–150 mm)
    up to 330 lbs (150 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    synthetic “stop-fix” brake lever for series LPA, steel brake lever for series LKPA
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    BPA, BKPA
    LMDA – light-duty twin wheel swivel rig with bolt hole
    2″–3″ (50–75 mm)
    up to 220 lbs (100 kg)
    pressed steel, double ball bearing in the swivel head, pressed swivel head
    synthetic brake lever
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LDA – light-duty twin wheel swivel rig with top plate
    2″–3″ (50–75 mm)
    up to 220 lbs (100 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, pressed swivel head
    synthetic brake lever
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    –
  • Synthetic swivel rig
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LKFG_bolt-hole
    LKFG_top-plate
    LKFGX_bolt-hole
    LKFGX_top-plate
    LWK-LWG_bolt-hole
    LWK-LWG_top-plate
    LWK-LWG_stem
    LWKX-LWGX Bolt hole
    LWKX-LWGX Top-plate
    LWKX-LWGX Stem
    LKDG-LKDB
    LKD-LKDG_bolt-hole
    LKD-LKDG_stem
    LKDX-LKDGX Bolt hole
    LKDX-LKDGX Stem
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LKFG – Synthetic swivel rig with bolt hole, design caster FLOW
    5″ (125 mm)
    up to 245 lbs (110 kg)
    high-quality thermoplastic, double ball bearing in the swivel head, modern, appealing design
    silver gray RAL 7001
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    bolt hole
    • soft tread 60 Shore A, wheel variant (-TPS)
    • with zinc-plated top plate fitting (-P25)
    • with zinc-plated plug-in stem (-ZA51)
    • special color
    BKFG
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKFG – Synthetic swivel rig with top plate, design caster FLOW
    5″ (125 mm)
    up to 245 lbs (110 kg)
    high-quality thermoplastic, double ball bearing in the swivel head, modern, appealing design
    silver gray RAL 7001 zinc-plated steel top plate
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    top plate
    • soft tread 60 Shore A, wheel variant (-TPS)
    • special color
    BKFG
    LKFGX – Synthetic swivel rig with bolt hole, design caster FLOW
    5″ (125 mm)
    up to 245 lbs (110 kg)
    high-quality thermoplastic, double corrosion-resistant ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    silver gray RAL 7001
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    bolt hole
    • soft tread 60 Shore A, wheel variant (-TPS)
    • with top plate fitting stainless steel version in accordance with GKN standard (-PX27)
    • stainless steel plug-in stem fitting (-ZAX51)
    • special color
    BKFGX
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKFGX – Synthetic swivel rig with top plate, design caster FLOW
    5″ (125 mm)
    up to 245 lbs (110 kg)
    high-quality thermoplastic, double corrosion-resistant ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    silver gray RAL 7001 vibration-ground finished stainless steel top plate
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °C to +50 °C temporarily up to +100 °C
    top plate
    • soft tread 60 Shore A, wheel variant (-TPS)
    • special color
    BKFGX
    LWK / LWG – synthetic swivel rig with bolt hole, design caster WAVE
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, modern, appealing design
    LWK: gray white RAL 9002 LWG: silver gray RAL 7001
    encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LWK / LWG – synthetic swivel rig with top plate, design caster WAVE
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, modern, appealing design
    LWK: gray white RAL 9002 LWG: silver gray RAL 7001 zinc-plated steel top plate
    encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    top plate
    • electrically conductive, non-marking (-ELS)
    • plate size 78x66 mm (-P28)
    • special color
    –
    LWK / LWG – synthetic swivel rig with stem, design caster WAVE
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, with steel plug-in stem, bolted and secured, modern, appealing design
    LWK: gray white RAL 9002 LWG: silver gray RAL 7001 zinc-plated steel stem
    encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    stem
    • electrically conductive, non-marking (-ELS)
    • special color
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LWKX / LWGX – synthetic swivel rig with bolt hole, design caster WAVE
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    LWKX: gray white RAL 9002 LWGX: silver gray RAL 7001
    corrosion-resistant, encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LWKX / LWGX – synthetic swivel rig with top plate, design caster WAVE
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, all parts including axle material are corrosion-resistant, modern, appealing design
    LWKX: gray white RAL 9002 LWGX: silver gray RAL 7001 vibration-ground finished stainless steel top plate
    corrosion-resistant, encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    top plate
    • electrically conductive, non-marking (-ELS)
    • plate size 90x66 mm (-PX26)
    • special color
    –
    LWKX / LWGX – synthetic swivel rig with stem, design caster WAVE
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, encapsulated, double-sealed, grooved ball bearing in the swivel head, stainless steel plug-in stem, bolted and secured, all parts including axle material are corrosion-resistant, modern, appealing design
    LWKX: gray white RAL 9002 LWGX: silver gray RAL 7001 vibration-ground fi nished stainless steel stem
    corrosion-resistant, encapsulated, double-sealed, grooved ball bearing
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    stem
    • electrically conductive, non-marking (-ELS)
    • special colour
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKDG / LKDB – synthetic twin wheel swivel rig for furniture casters
    4″–5″ (100–125 mm)
    up to 245 lbs (110 kg)
    high-quality nylon 6, impact resistant, high-quality synthetic plain bore in the swivel head
    LKDG: light gray RAL 7035 LKDB: black RAL 9005 zinc-plated steel threaded pin
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    threaded pin
    • electrically conductive, non-marking (-ELS)
    • stainless steel version
    • zinc-plated steel top plate fitting (-P...)
    • zinc-plated steel plug-in stem (-ES)
    • special color
    –
    LKD / LKDG – synthetic twin wheel swivel rig with bolt hole, design caster MOVE
    4″–5″ (100–125 mm)
    up to 275 lbs (125 kg)
    high-quality nylon 6, impact resistant, two grooved ball bearings in the swivel head sealed on both sides, modern, appealing design
    LKD: gray white RAL 9002 LKDG: silver gray RAL 7001
    two grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    bolt hole
    • electrically conductive, non-marking (-ELS)
    • threaded pin (-GS10 / -GS12)
    • swivel lock combined with thread lock (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDH / LKDGH)
    • top plate fitting (-P25/-P26)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKD / LKDG – synthetic twin wheel swivel rig with stem, design caster MOVE
    4″–5″ (100–125 mm)
    up to 275 lbs (125 kg)
    high-quality nylon 6, impact resistant, two grooved ball bearings in the swivel head sealed on both sides, with steel plug-in stem, bolted and secured, modern, appealing design
    LKD: gray white RAL 9002 LKDG: silver gray RAL 7001 zinc-plated steel stem
    two grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    stem
    • electrically conductive, non-marking (-ELS)
    • swivel lock combined with thread lock (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDH / LKDGH)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKDX / LKDGX – synthetic twin wheel swivel rig, corrosion resistant, with bolt hole, designer caster MOVE
    4″–5″ (100–125 mm)
    up to 275 lbs (125 kg)
    high-quality nylon 6, impact resistant, two corrosion-resistant grooved ball bearings in swivel head sealed on both sides, all parts including axle material are corrosion-resistant, modern, appealing design
    LKDX: gray white RAL 9002 LKDGX: silver gray RAL 7001
    two corrosion-resistant grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    bolt hole
    • electrically conductive, non-marking (-ELS)
    • threaded pin (-GSX10 / -GSX12)
    • swivel lock combined with thread lock (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDXH / LKDGXH)
    • top plate fitting (-PX25/-PX26)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LKDX / LKDGX – synthetic twin wheel swivel rig, corrosion resistant, with stem fitting, designer caster MOVE
    4″–5″ (100–125 mm)
    up to 275 lbs (125 kg)
    high-quality nylon 6, impact resistant, two corrosion-resistant grooved ball bearings in swivel head sealed on both sides, with stainless steel plug-in stem, bolted and secured, all parts including axle material are corrosion-resistant, modern, appealing design
    LKDX: gray white RAL 9002 LKDGX: silver gray RAL 7001 vibration-ground fi nished stainless steel stem
    two corrosion-resistant grooved ball bearings sealed on both sides
    maintenance-free, long-life grease
    -5 °F to +160 °F (-20 °C to +70 °C) temporarily up to +175 °F (+80 °C)
    stem
    • electrically conductive, non-marking (-ELS)
    • swivel lock combined with thread lock (1 x 360°) (-RIFI)
    • special mounting height 135 mm (LKDXH / LKDGXH)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
  • Pressed steel swivel rig for transport equipment casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LE
    LER
    LEZ
    L
    LR
    LK
    LKR
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LE – pressed steel swivel rig with top plate
    2 3/8″–8″(60–200 mm)
    up to 660 lbs (300 kg)
    pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    • steel foot guard (-FS)
    B
    LER – pressed steel swivel rig with bolt hole
    2 3/8″–8″(60–200 mm)
    up to 660 lbs (300 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    • steel foot guard (-FS)
    • truck lock (FF...)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LEZ – pressed steel swivel rig with stem
    3″–8″(75–200 mm)
    up to 660 lbs (300 kg)
    pressed steel, double ball bearing in the swivel head, steel plug-in stem and central kingpin bolted and secured, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    stem
    • steel foot guard (-FS)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    L – pressed steel swivel rig, medium- duty version, with top plate
    2 3/8″–11″(60–280 mm)
    up to 1,320 lbs (600 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin (from wheel Ø 150 mm), minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer (exception: plate size 175x175 mm)
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    • steel foot guard (-FS)
    B, BH
    LR – pressed steel swivel rig, medium- duty version, with bolt hole
    2 3/8″–5″ (60–125 mm)
    up to 550 lbs (250 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LK – pressed steel swivel rig, heavy- duty version, with top plate
    2 9/16″–8″ (65–200 mm)
    up to 1,320 lbs (600 kg)
    strong pressed steel, double ball bearing in the swivel head, strong central kingpin (from wheel Ø 125x50 mm), minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    • steel foot guard (-FS)
    • truck lock (FF...)
    BK, BH
    LKR – pressed steel swivel rig, heavy- duty version, with bolt hole
    2 9/16″–5″ (65–125 mm)
    up to 770 lbs (350 kg)
    strong pressed steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    • steel foot guard (-FS)
    • truck lock (FF...)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
  • Pressed steel swivel rig for heavy-duty casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LH
    LHZ
    LHD
    LUH
    LO
    LOD
    LS
    LSD
    LSSD
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LH – pressed steel swivel rig, heavy- duty version, with top plate
    2 3/8″–10″ (60–250mm)
    up to 1,980 lbs (900 kg)
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, bolted and secured central kingpin, extremely strong, minimum wear at high load
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    • steel foot guard (-FS)
    • spring-loaded foot guard (-FG)
    • truck lock (FF...)
    BH
    LHZ - pressed steel swivel rig, heavy- duty design, with stem
    5″–8″ (125–200 mm)
    up to 1,765 lbs (800 kg)
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, very strong, welded steel plug-in stem, bolted and secured, minimum wear at high load
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    stem
    • steel foot guard (-FS)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LHD – pressed steel twin wheel swivel rig, heavy-duty design, with top plate
    2 3/8″–5″ (60–125mm)
    up to 1,100 lbs (500 kg)
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, bolted and secured central kingpin, extremely strong, minimum wear at high load
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    BOD
    • the long plate side is parallel to the wheel axle for rigid casters
    LUH – pressed steel swivel rig, heavy-duty design, enclosed, with top plate
    5″–8″ (125–200 mm)
    up to 2,200 lbs (1,000 kg)
    strong pressed steel, four-point ball bearing for extremely heavy loads, particularly resistant to shocks and impact due to specially-shaped, hardened bearing seats, smooth rolling characteristic and low wear, increased service life
    zinc-plated, blue-passivated, Cr6-free
    enclosed and sealed swivel head
    maintenance-free, long-life grease
    -20 °F to +210 °F (-30 °C to +100 °C)
    top plate
    • steel foot guard (-FS)
    • truck lock (FF...)
    BH
    LO – heavy-duty welded steel swivel rig
    5″–10″ (125–250 mm)
    up to 2,645 lbs (1,200 kg)
    solid welded steel construction, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to labyrinth design
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    • plate size 175x140 mm (-35)
    • steel foot guard (-FS)
    • truck lock (FF...)
    BO
    LOD – heavy-duty welded steel twin wheel swivel rig
    3″–5″ (75–125 mm)
    up to 2,645 lbs (1,200 kg)
    solid welded steel construction, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to labyrinth design
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    BOD
    • the long plate side is parallel to the wheel axle for rigid casters
    LS – heavy-duty welded steel swivel rig, heavy-duty swivel head
    4″–25″ (100–620 mm)
    up to 26,455 lbs (12,000 kg)
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -20 °F to +210 °F (-30 °C to +100 °C)
    top plate
    • steel foot guard (-FS)
    • spring-loaded foot guard (-FG)
    • truck lock (FF...)
    BS
    LSD – heavy-duty welded steel twin wheel swivel rig, heavy-duty swivel head
    3 1/8″–20″ (80–500 mm)
    up to 44,100 lbs (20,000 kg)
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -20 °F to +210 °F (-30 °C to +100 °C)
    top plate
    • steel foot guard (-FS)
    BSD
    • the long plate side is parallel to the wheel axle for rigid casters
    LSSD – heavy-duty welded steel twin wheel swivel rig, extra heavy-duty swivel head
    20″ (500 mm)
    up to 66,140 lbs (30,000 kg)
    particularly robust welded steel construction, four-point swivel bearing for extremely heavy loads, grease nipple
    zinc-plated, yellow-passivated, Cr6-free
    integrated sealing ring for ball protection
    according to Blickle maintenance instructions
    -20 °F to +210 °F (-30 °C to +100 °C)
    top plate
    BSSD
  • Spring-loaded heavy-duty swivel rig
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LHF
    LPFE
    LSFN
    LSFE
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LHF – pressed steel swivel rig, heavy- duty design, with steel spring
    4″–8″ (100–200 mm)
    up to 1,765 lbs (800 kg)
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially- shaped, hardened bearing seats, bolted and secured central kingpin, extremely strong, minimum wear at high load, robust spring structure with steel spring
    Further information is available here.
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    BHF
    LPFE – heavy-duty swivel rig with polyurethane torsion springs
    4″–6″ (100–150 mm)
    up to 1,100 lbs (500 kg)
    solid welded steel construction, solid forged part, one sealed lifetime lubricated grooved ball bearing in the swivel head (two for wheel Ø 5″ x 2″ (125 x 50 mm) or more), patented woodruff key design for outstanding spring-damping properties
    You can find more information here.
    zinc-plated, yellow-passivated, Cr6-free
    two sealed grooved ball bearings
    maintenance-free, long-life grease
    -5 °F to +175 °F (-20 °C to +80 °C)
    top plate
    • stem fitting (-ZA)
    BPFE
    LSFN – heavy-duty welded steel swivel rig with steel spring
    6 5/16″–12″ (160–300 mm)
    up to 5,290 lbs (2,400 kg)
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong, minimum wear at high load, robust spring structure with steel spring
    For more information, watch this video.
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -20 °F to +210 °F (-30 °C to +100 °C)
    top plate
    • different spring tensions
    BSFN
    LSFE – heavy-duty welded steel swivel rig with polyurethane spring
    6 5/16″–10″ (160–250 mm)
    up to 3,970 lbs (1,800 kg)
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong, elastomer spring for excellent damping properties
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    -5 °F to +175 °F (-20 °C to +80 °C)
    top plate
    • different spring tensions
    BSFE
    • spring characteristics can be adjusted by swapping out the elastomer hinged plate construction
  • Stainless steel swivel rig for light-duty casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LRXA-LKRXA
    LPXA-LKPXA
    LEX
    LEXR
    LEXZ
    LX
    LKX
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LRXA / LKRXA – stainless steel light-duty swivel rig with bolt hole
    2″–5″ (50–125 mm)
    up to 265 lbs (120 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground fi nishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    • expander fitting for round and square tubes (see page 398)
    • stainless steel plug-in stem fitting (-ZAX51)
    • buffer (see page 398)
    BRXA, BKRXA
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LPXA / LKPXA – stainless steel light-duty swivel rig with top plate
    2″–5″ (50–125 mm)
    up to 265 lbs (120 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    top plate
    BPXA, BKPXA
    LEX – stainless steel swivel rig with top plate
    3″–8″ (75–200 mm)
    up to 660 lbs (300 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    • automatic direction reset device (-RIR2)
    • washing machine resistant caster (DIN 18867-8) (-GKN)
    • synthetic foot guard (-FP)
    BX
    LEXR – stainless steel swivel rig with bolt hole
    3″–8″ (75–200 mm)
    up to 660 lbs (300 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    bolt hole
    • synthetic foot guard (-FP)
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LEXZ – Stainless steel swivel rig with stem
    3″–8″ (75–200 mm)
    up to 660 lbs (300 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, stainless steel plug-in stem and central kingpin bolted and secured, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -20 °F to +265 °F (-30 °C to +130 °C)
    stem
    • synthetic foot guard (-FP)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LX – stainless steel swivel rig, medium- duty version, with top plate
    4″–8″ (100–200 mm)
    up to 880 lbs (400 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    • synthetic foot guard (-FP)
    BX
    LKX – stainless steel swivel rig, heavy- duty design, with top plate
    3″–8″ (75–200 mm)
    up to 1,765 lbs (800 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin (from wheel Ø 5″ x 2″ (125 x 50 mm)), minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    • automatic direction reset device (-RIR2)
    BKX
  • Heat-resistant pressed steel swivel rig
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LI
    LIR
    LIK
    LIO
    LIX
    LIXR
    LIKX
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LI – heat-resistant pressed steel swivel rig with top plate
    3 1/8″–8″ (80–200 mm)
    up to 880 lbs (400 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to +570 °F (+300 °C)
    top plate
    • teflon-coated stainless steel bushing (-XAT)
    B, BI
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIR – heat-resistant pressed steel swivel rig with bolt hole
    3 1/8″–5″ (80–125 mm)
    up to 330 lbs (150 kg)
    pressed steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to +570 °F (+300 °C)
    bolt hole
    • teflon-coated stainless steel bushing (-XAT)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIK – Heat-resistant pressed steel swivel rig, heavy-duty design, with top plate
    4″ to 5″ (100–125 mm)
    up to 770 lbs (350 kg)
    strong pressed steel, double ball bearing in the swivel head, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to highly heat-resistant sealing ring
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to 570 °F (+300 °C)
    top plate
    • teflon-coated stainless steel bushing (-XAT)
    BK, BIK
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIO – Heat-resistant, heavy-duty welded steel swivel rig
    5″–10″ (125–250 mm)
    up to 2,645 lbs (1,200 kg)
    solid welded steel construction, double ball bearing in the swivel head, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, grease nipple, bolted and secured welded central kingpin, extremely strong, swivel head play is set specifically for high-temperature applications
    zinc-plated, blue-passivated, Cr6-free
    ball protection due to labyrinth design
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to +570 °F (+300 °C)
    top plate
    BO
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    LIX – Heat-resistant stainless steel swivel rig with top plate
    3 1/8″–8″ (80–200 mm)
    up to 880 lbs (400 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to +570 °F (+300 °C)
    top plate
    • grease-free swivel head (-OF)
    • teflon-coated stainless steel bushing (-XAT)
    BX
    LIXR – Heat-resistant stainless steel swivel rig with bolt hole
    3 1/8″–5″ (80–125 mm)
    up to 330 lbs (150 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, strong central kingpin, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to +570 °F (+300 °C)
    bolt hole
    • grease-free swivel head (-OF)
    • teflon-coated stainless steel bushing (-XAT)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    LIKX – Heat-resistant stainless steel swivel rig, heavy-duty design, with top plate
    4″–5″ (100–125 mm)
    up to 660 lbs (300 kg)
    high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, double ball bearing in the swivel head, smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process used for the swivel head, swivel head play is set specifically for high-temperature applications, all parts including axle material are corrosion-resistant
    vibration-ground finishing
    ball protection due to highly heat-resistant sealing ring
    maintenance-free, long-life grease
    -30 °F to +520 °F (-35 °C to +270 °C) temporarily up to +570 °F (+300 °C)
    top plate
    • teflon-coated stainless steel bushing (-XAT)
    BKX
  • Compact casters swivel rig / levelling caster swivel rig
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LD
    HRLK
    HRLK-HN
    HRLKF
    HRLK-VS
    HRIG
    HRP-HRSP
    HRLH-HRLHD
    HRLSD
    HRLK-HYD
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LD – Swivel rig for twin wheel compact caster
    2″–2 3/8″ (50–60 mm)
    up to 550 lbs (250 kg)
    zinc die-cast, high-quality ball bearing in the swivel head, zinc-plated steel threaded pin
    steel threaded pin zinc-plated, blue-passivated, Cr6-free
    maintenance-free, long-life grease
    -5 °F to +140 °F (-20 °C to +60 °C)-20 °C to +60 °C
    threaded pin
    –
    HRLK – Levelling caster pressed steel swivel rig with fixed operating lever, with top plate fitting
    3″–4″ (75–100 mm)
    up to 660 lbs (300 kg)
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock, height adjustment with lever
    More information is available here.
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    –
    • ergonomic lever
    • fixed position lever for ease of use of the lever
    • high floor clearance in the travel position
    HRLK...-HN – Levelling caster pressed steel swivel rig with swivelling operating and release lever, with top plate fitting
    3 1/8″ (80 mm)
    up to 550 lbs (250 kg)
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock, height adjustment with swiveling operating and release lever
    More information is available here.
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    –
    • low force required to release and activate the truck lock
    • operating and release lever can be pivoted under the edge of the unit
    • high floor clearance in the travel position
    HRLK...-F – Levelling casters with fixed lock and height-adjustable wheel with top plate
    3 1/8″ (80 mm)
    up to 330 lbs (150 kg)
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock, height adjustment with swiveling operating lever
    More information is available here.
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    –
    • very good stability
    • low force required to make height adjustments to the wheel
    • lever can be pivoted under the edge of the unit
    HRLK...-VS – Height adjustment caster pressed steel swivel rig with adjustment screw, with top plate fitting
    3 1/8″ –8″ (80–100 mm)
    up to 620 lbs (280 kg)
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, total height can be adjusted when stationary with adjustment screw (SW17), wheel locked in place with adjustment screw is used
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    -20 °F to +160 °F (-30 °C to +70 °C)
    top plate
    –
    • wheel locking when height adjustment is active
    • battery-powered screwdriver can be used to make height adjustments quickly
    HRIG – Levelling caster swivel rig with bolt hole (female thread)
    1 3/4″–2 13/16″ (45–72 mm)
    up to 1,655 lbs (750 kg)
    die-cast aluminum, high-quality ball bearing in the swivel head, hexagonal steel top plate, truck lock made of hard rubber, height adjustment using wrench or integrated adjustment wheel
    powder-coated
    sealing ring
    maintenance-free, long-life grease
    +15 °F to +195 °F (-10 °C to +90 °C)
    bolt hole (female thread)
    –
    • the top plate should be in contact with the mounting surface to maximise load capacity
    HRP / HRSP – Levelling caster swivel rig with top plate
    1 3/4″–3 9/16″ (45–90 mm)
    4,410 lbs (2,000 kg)
    die-cast aluminum, high-quality ball bearing in the swivel head, steel top plate, truck lock made of hard rubber (HRSP: truck lock made of aluminum), height adjustment using wrench or integrated adjustment wheel, series HRSP with wrench only
    powder-coated
    sealing ring
    maintenance-free, long-life grease
    +15 °F to +195 °F (-10 °C to +90 °C)
    top plate
    –
    • compact mounting height
    HRLH / HRLHD – Levelling caster pressed steel swivel rig, heavy-duty design, with top plate
    3″ (75 mm)
    up to 1,320 lbs (600 kg)
    strong pressed steel, heavy fork and top plate, double ball bearing in the swivel head, bolted and secured central kingpin, extremely strong, minimum wear at high load, particularly resistant to shocks and impact due to four specially-shaped, hardened bearing seats, steel truck lock, height adjustment with wrench
    zinc-plated, blue-passivated, Cr6-free
    ball protection from special design of swivel head
    maintenance-free, long-life grease
    +20 °F to +195 °F (-30 °C to +90 °C)
    top plate
    –
    • also available as twin wheel swivel caster
    • high floor clearance in the travel position
    • excellent stability
    HRLSD – Heavy-duty, welded steel levelling caster twin wheel swivel rig with top plate, heavy-duty swivel head
    5″ (125 mm)
    up to 2,865 lbs (1,300 kg)
    particularly robust welded steel construction, axial grooved ball bearing ISO 104 and tapered roller bearing ISO 355 in the swivel head, grease nipple, bolted and secured welded central kingpin, extremely strong, wheels and truck lock can be levelled using a wrench (SW24)
    zinc-plated, yellow-passivated, Cr6-free
    ball protection due to sealing ring and labyrinth design
    maintenance-free, long-life grease
    +20 °F to +210 °F (-30 °C to +100 °C)
    top plate
    –
    • excellent stability
    • particularly large adjustment range
    HRLK...-HYD – Levelling caster pressed steel swivel rig, medium-duty version for hydraulic levelling caster set
    4″ (100 mm)
    up to 1,655 lbs (750 kg) (set)
    strong pressed steel, double ball bearing in the swivel head, minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process, steel truck lock with base plate made of thermoplastic rubber-elastomer
    zinc-plated, blue-passivated, Cr6-free
    sealing ring with integrated ball spacer
    maintenance-free, long-life grease
    +30 °F to +105 °F (0 °C to +40 °C)
    top plate
    –
    • centralised, synchronised and ergonomic lifting of four levelling casters by means of a hydraulic pump
    • low-noise activation
    • very low force required
    • high floor clearance in the travel position
  • Progressus brand stainless steel swivel rig
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    LPX
    LPZ
    Series
    For wheel Ø
    Load capacity
    Rig structure
    Surface
    Swivel head seal
    Maintenance under standard conditions
    Temperature resistance
    Fitting types
    Brake systems
    ‘stop-fix’
    ‘stop-top’
    ‘central-stop’
    ‘ideal-stop’
    ‘Radstop’
    Swivel lock
    Options
    Matching rigid rig series
    Additional considerations
    LPX – Stainless steel swivel rig with top plate
    84–186 mm
    440 lbs (200 kg)
    precision fork head made from corrosion- resistant steel (1.4034/AISI304), four-point ball bearing for extremely heavy loads, grease nipple, fork made from corrosion-resistant stainless steel (1.4301/AISI 304)
    fork head polished, fork vibration-ground finished
    ball protection from special design of precision fork head and an o-ring
    maintenance-free, long-life grease
    -30 °C to +134 °C
    top plate
    • with side thread lock (-SRA)
    • with swivel lock (-RI)
    –
    • suitable for autoclaves
    LPZ – Hospital bed casters with stem fitting and integrated switching cam
    6″ (150 mm)
    440 lbs (200 kg)
    precision fork head made from mild steel, four-point ball bearing for extremely heavy loads, grease nipple, fork made from corrosion-resistant stainless steel (1.4301/AISI 304)
    fork head chrome plated, fork vibration- ground fi nished
    ball protection from special design of precision fork head and an o-ring
    maintenance-free, long-life grease
    -30 °C to +134 °C
    stem
    • with central and swivel lock (-CS11RI2)
    • load-dependent directional latch with ball pressure screw (-RIR22)
    –
    • suitable for autoclaves