FPTH – Guide roller series
Guide rollers with thermoplastic polyurethane tread and nylon wheel center
FPTH series guide rollers use a thermoplastic polyurethane tread which is cast directly onto a nylon wheel center, in contrast to FPU series wheels. With a hardness of 92 Shore A, the tread forms a chemically bonded and irreversible connection with the wheel center which is cast directly onto the sealed ball bearing. The wheels are also hydrolysis-resistant, making them suitable for equipment and machinery used outside in wet areas, such as cranes, conveyor belt systems and lifts.
-
FPTH – Guide rollers
The FPTH guide rollers come in sizes ranging between 2 ³⁄₈ and 5 inch in diameter as standard.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Ball bearing
Axle bore Ø
[inch]Clamping
length
[inch]FPTH 60x20/17-12K 2 ³⁄₈ ¹³⁄₁₆ 245 6203 2RS ¹¹⁄₁₆ ¹⁄₂ To the product FPTH 70x20/25-15K 2 ³⁄₄ ¹³⁄₁₆ 285 6205 2RS 1 ⁹⁄₁₆ To the product FPTH 70x25/20-14K 2 ³⁄₄ 1 355 6204 2RS ¹³⁄₁₆ ⁹⁄₁₆ To the product FPTH 80x20/15-11K 3 ¹⁄₈ ¹³⁄₁₆ 330 6202 2RS ⁹⁄₁₆ ⁷⁄₁₆ To the product FPTH 80x20/17-14K 3 ¹⁄₈ ¹³⁄₁₆ 330 6303 2RS ¹¹⁄₁₆ ⁹⁄₁₆ To the product FPTH 80x20/20-14K 3 ¹⁄₈ ¹³⁄₁₆ 330 6204 2RS ¹³⁄₁₆ ⁹⁄₁₆ To the product FPTH 80x25/25-12K 3 ¹⁄₈ 1 395 6005 2RS 1 ¹⁄₂ To the product FPTH 100x25/25-15K 4 1 505 6205 2RS 1 ⁹⁄₁₆ To the product FPTH 125x25/25-15K 5 1 640 6205 2RS 1 ⁹⁄₁₆ To the product