Options

Truck locks. Swivel locks. Bumpers.

The functionality of wheels or casters can be enhanced by using different options. Blickle provides the following options: Jacks/truck locks, swivel locks, bumpers, hub caps and STARLOCK® caps, swivel heads, bushings and adapter plates.

  • Truck locks / jacks

    The truck locks and jacks are zinc-plated, blue-passivated and Cr6-free. They are attached directly to the transport unit. Truck locks are used to lock transport units in a resting position. By operating the pedal, the transport unit is somewhat relieved of its load without being lifted.
    Jacks are used to raise a transport unit to take the load off the wheels while it is in a resting position. The jacks provide their best performance if the total height of the operated jack is ¹³/₆₄ inch higher than the selected swivel or rigid casters.
    Depending on the weight of the person operating the transport equipment, the lifting force is between 331 lbs and 551 lbs. The vertical load on the jack must not exceed 1102 lbs when raised.

    For more information click here.


    Total height

    [inch]
    Total height
    actuated
    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    FF 100-1 4 ¹⁄₄ 5 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product
    FF 125-1 5 ¹⁄₄ 6 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product
    FF 125 5 ⁹⁄₁₆ 7 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    FF 150 6 ¹¹⁄₁₆ 8 ³⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    FF 160L 6 ⁹⁄₁₆ 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    FF 160 6 ⁷⁄₈ 8 ³⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    FF 200L 8 ¹⁄₈ 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    FF 200 8 ⁹⁄₁₆ 10 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    WH 160 6 ⁹⁄₁₆ 8 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    WH 200 8 ¹⁄₈ 9 ¹³⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
    WH 250 10 ¹⁄₈ 11 ¹³⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product
  • Swivel locks

    Swivel locks fix the swivel motion of a swivel caster in specific directions. When the swivel lock is activated, the swivel caster acts like a rigid caster without having to make structural changes to the swivel caster. Swivel locks can also be retrofitted to casters. Swivel locks are made from blue-passivated and zinc-plated steel or corrosion resistant steel
    You can find more information here.


    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Total width

    [inch]
    Actuation
    lever protrusion
    [inch]
    RI-03.01 2 3/8 3 ⁵⁄₁₆ 2 ¹⁵⁄₁₆ To the product
    RI-03.01-KX 2 3/8 3 ³⁄₈ 2 ¹⁵⁄₁₆ To the product
    RI-03.01-HI 3 ⁵⁄₁₆ 2 ¹⁵⁄₁₆ To the product
    RI-03.03 3 - 3 1/8 4 ⁵⁄₁₆ 3 ¹¹⁄₁₆ To the product
    RI-03.03-KX 3 - 3 1/8 4 ⁵⁄₁₆ 3 ¹³⁄₁₆ To the product
    RI-04.01 2 3/8 3 ³⁄₈ 4 ³⁄₁₆ To the product
    RI-04.03 3 - 3 1/8 4 ⁵⁄₁₆ 3 ¹¹⁄₁₆ To the product
    RI-05.01 2 3/8 3 ³⁄₈ 4 ³⁄₁₆ To the product
    RI-05.01-HI 3 ³⁄₈ 4 ³⁄₁₆ To the product
    RI-05.03 3 - 3 1/8 4 ⁵⁄₁₆ 4 ³⁄₈ To the product
    RI-05.03-KX 3 - 3 1/8 4 ⁵⁄₁₆ 4 ⁷⁄₁₆ To the product
    RI-05.03-HI 4 ⁵⁄₁₆ 4 ³⁄₈ To the product
  • Bumpers

    Bumpers reduce the risk of damage to walls and transport trolleys in the event of a collision.
    Bumpers are available for round and square tubes. Two different designs are available: a soft polyethylene with a hardness of 48 Shore D and solid rubber with a hardness of 75 Shore A. The wheels are non-marking and available in gray, gray white or silver gray. They are fastened or mounted to tubular frames in the outsides of vehicles.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Hole

    [inch]
    Hardness


    ARG 75/R10 3 ²⁹⁄₃₂ ³⁄₈ 75 Shore A To the product
    AW 100/V25 4 ¹¹⁄₁₆ 1 48 Shore D To the product
    AW 100/R25 4 ¹¹⁄₁₆ 1 48 Shore D To the product
    AG 100/V25 4 ¹¹⁄₁₆ 1 48 Shore D To the product
    AG 100/R25 4 ¹¹⁄₁₆ 1 48 Shore D To the product
    ARG 100/R26 4 ²⁹⁄₃₂ 1 75 Shore A To the product
    ARG 100/R32 4 ²⁹⁄₃₂ 1 ¹⁄₄ 75 Shore A To the product
    AW 125/V25 4 ¹⁵⁄₁₆ ¹¹⁄₁₆ 1 48 Shore D To the product
    AW 125/R25 4 ¹⁵⁄₁₆ ¹¹⁄₁₆ 1 48 Shore D To the product
    AG 125/V25 4 ¹⁵⁄₁₆ ¹¹⁄₁₆ 1 48 Shore D To the product
    AG 125/R25 4 ¹⁵⁄₁₆ ¹¹⁄₁₆ 1 48 Shore D To the product
    ARG 125/R32 4 ¹⁵⁄₁₆ ²⁹⁄₃₂ 1 ¹⁄₄ 75 Shore A To the product
    ARG 125/R26 4 ¹⁵⁄₁₆ ²⁹⁄₃₂ 1 75 Shore A To the product
  • Hub caps and STARLOCK caps

    Hub caps are made from zinc-plated, blue-passivated, Cr6-free pressed steel.
    They protect the outside ball bearing of end wheels against dirt, dust, etc., and cover the axle end and wheel fitting. In end wheels, the ball bearing is slightly recessed on the outside of the hub. This makes it easy to fit the hub cap on the wheel hub.
    STARLOCK® caps are an easy way to fix light duty wheels on an axle. The wheel is placed on an axle as the end wheel, and the STARLOCK® cap is pressed onto the outer end of the axle.


    Total height

    [inch]
    Shaft Ø

    [inch]
    Outer Ø

    [inch]
    ST-KA 12 ⁵⁄₁₆ ¹⁄₂ 1 To the product
    ST-KA 15 ³⁄₈ ⁹⁄₁₆ 1 ¹⁄₈ To the product
    ST-KA 20 ⁷⁄₁₆ ¹³⁄₁₆ 1 ¹⁄₂ To the product
    ST-KA 25 ¹⁄₂ 1 1 ³⁄₄ To the product
  • Swivel heads

    Swivel heads can be used for a wide variety of applications: Rotating plates, rotating platforms, flatbed turntables or axle-pivot steering systems. Combined with standard rigid casters, they can create caster systems without an offset, which are easy to steer.


    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Load capacity
    (static)
    [lbs]
    Flange plate
    height
    [inch]
    Flange plate internal
    clearance
    [inch]
    DK-L-3 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 880 1 ¹⁄₈ ¹³⁄₁₆ To the product
    DK-LUH-3 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2,205 1 ¹⁄₄ ¹³⁄₁₆ To the product
    DK-LS-3 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3,305 1 ⁷⁄₁₆ ¹³⁄₁₆ To the product
    DK-LS-35 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 5,510 1 ³⁄₄ ¹⁵⁄₁₆ To the product
    DK-LS-36 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 5,510 1 ³⁄₄ ¹⁵⁄₁₆ To the product
    DK-LS-38 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 12,125 2 ³⁄₈ 1 To the product
  • Bushings

    The PTFE-coated stainless steel bushing consists of a corrosion-resistant bushing with a PTFE coating. When rotating and under load, the PTFE coating expands onto the inside of the plain bore of the wheel. This provides the desired pairing (PTFE / stainless steel) with outstanding sliding characteristics. It also reduces noise emissions. This option is available for a wide range of heat-resistant wheel series.


    Total
    length
    [inch]
    Outer Ø

    [inch]
    Internal Ø

    [inch]
    XAT 12x37 1 ⁷⁄₁₆ ¹⁄₂ ³⁄₈ To the product
    XAT 12x40 1 ⁹⁄₁₆ ¹⁄₂ ³⁄₈ To the product
    XAT 12x47 1 ⁷⁄₈ ¹⁄₂ ³⁄₈ To the product
  • Adapter plates

    Adapter plates can be used to compensate for differences between the mounting height of different casters. Adapter plates can also be used to modify the mounting height of the transport unit. Adapter plates are available in steel (zinc-plated, blue-passivated, Cr6-free) and synthetic (nylon, black) designs.


    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Plate
    thickness
    [inch]
    AP1-10 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 ³⁄₈ To the product
    AP3-17 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ¹¹⁄₁₆ To the product
    APS1-02,5 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 ¹⁄₈ To the product
    APS1-08 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 ⁵⁄₁₆ To the product
    APS3-04 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₁₆ To the product
    APS3-08 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ⁵⁄₁₆ To the product
    APS3-10 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ To the product