ALB…-ESD – Wheel series
Electrostatically conductive heavy duty wheels with Blickle Besthane® polyurethane tread, with aluminum wheel center
The tread of the ALB series consists of the high-quality polyurethane-elastomer Blickle Besthane®. This has a hardness of 92 Shore A and is cast onto a wheel center made of die-cast aluminum. In addition to providing a high dynamic load capacity, the tread is highly resistant to cut and tear propagation and provides a very low level of rolling resistance. The optimised tread geometry of this series reduces rolling resistance by up to 40% compared to other polyurethane series. The tread material has a maximum resistance of 109 ohms.
The ALB wheels are particularly successful in areas where the highest demands are placed on speed, ergonomics and industrial safety. They also protect users and electrical components against electrostatic discharge.
-
ALB…-ESD – Wheels
Wheels in the ALB…-ESD series have diameters ranging between 100 and 200 mm and are available with a ball bearing.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Load capacity
at 6 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]ALB 101/15K-ESD 4 1 ⁹⁄₁₆ 880 ball bearing ⁹⁄₁₆ 1 ⁹⁄₁₆ ALB 125/15K-ESD 5 1 ⁹⁄₁₆ 1,215 ball bearing ⁹⁄₁₆ 1 ³⁄₄ ALB 150/20K-ESD 6 2 1,435 705 ball bearing ¹³⁄₁₆ 2 ³⁄₈ ALB 160/20K-ESD 6 ⁵⁄₁₆ 2 1,655 815 ball bearing ¹³⁄₁₆ 2 ³⁄₈ ALB 200/20K-ESD 8 2 1,765 880 ball bearing ¹³⁄₁₆ 2 ³⁄₈
Wheel Ø
[mm]Wheel
width
[mm]Load capacity
at 4 km/h
[kg]Load capacity
at 10 km/h
[kg]Bearing type
Axle bore Ø
[mm]Hub
length
[mm]ALB 101/15K-ESD 100 40 400 ball bearing 15 40 ALB 125/15K-ESD 125 40 550 ball bearing 15 45 ALB 150/20K-ESD 150 50 650 320 ball bearing 20 60 ALB 160/20K-ESD 160 50 750 370 ball bearing 20 60 ALB 200/20K-ESD 200 50 800 400 ball bearing 20 60