TPA – Wheel and caster series
Wheels and casters with thermoplastic rubber tread and polypropylene wheel center
Wheels and casters in the TPA series have a tread of high-quality thermoplastic rubber-elastomer (TPE) and an impact-resistant polypropylene wheel center. The gray tread with a hardness of 85 Shore A is chemically bonded to the wheel center. The wheels are non-marking and characterised by low rolling and swivel resistance.
The oil in the tread may cause some discoloration on sensitive surfaces. In such cases, the VPP, POES, POEV oder PATH series can be used as an alternative.
-
TPA – Wheels
The wheels in the TPA series come in sizes ranging between 3 ¹⁄₈ and 8 inch in diameter. Customers can choose between a ball bearing, roller bearing or central encapsulated ball bearing. Electrically conductive wheels and wheels with additional ball bearing seals are also available.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]TPA 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore ¹⁄₂ 1 ³⁄₈ TPA 80/8KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ TPA 102/12G 4 1 ¹⁄₄ 245 plain bore ¹⁄₂ 1 ³⁄₄ TPA 102/8KF 4 1 ¹⁄₄ 245 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ TPA 102/10KF 4 1 ¹⁄₄ 245 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ TPA 127/12G 5 1 ¹⁄₄ 275 plain bore ¹⁄₂ 1 ³⁄₄ TPA 127/8KF 5 1 ¹⁄₄ 275 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ TPA 127/10KF 5 1 ¹⁄₄ 275 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ TPA 160/20G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore ¹³⁄₁₆ 2 ³⁄₈ TPA 160/20R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing ¹³⁄₁₆ 2 ³⁄₈ TPA 160/20XR 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing ¹³⁄₁₆ 2 ³⁄₈ TPA 160/12KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 ball bearing (C) ¹⁄₂ 2 ⁷⁄₁₆ TPA 200/20G 8 1 ⁹⁄₁₆ 550 plain bore ¹³⁄₁₆ 2 ³⁄₈ TPA 200/20R 8 1 ⁹⁄₁₆ 550 roller bearing ¹³⁄₁₆ 2 ³⁄₈ TPA 200/20XR 8 1 ⁹⁄₁₆ 550 roller bearing ¹³⁄₁₆ 2 ³⁄₈ TPA 200/12KA 8 1 ⁹⁄₁₆ 550 ball bearing (C) ¹⁄₂ 2 ⁷⁄₁₆ -
TPA – Swivel casters with plate
The TPA wheel series is available for the following rig with top plate fitting:
LE series: Pressed steel swivel rig with top plate fitting
A detailed description of the rig series and the different brake systems is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LE-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-TPA 102G 4 1 ¹⁄₄ 245 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LE-TPA 102KF 4 1 ¹⁄₄ 245 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-TPA 102KF-12 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ LE-TPA 127G 5 1 ¹⁄₄ 275 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-TPA 127KF 5 1 ¹⁄₄ 275 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-TPA 127KF-12 5 1 ¹⁄₄ 275 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ¹⁄₂ LE-TPA 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LE-TPA 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LE-TPA 200G 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LE-TPA 200R 8 1 ⁹⁄₁₆ 550 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ -
TPA – Swivel casters with bolt hole
As an alternative to a plate fitting, the TPA series is also available with a bolt hole fitting:
LER series: Pressed steel swivel rig with bolt hole
A detailed description of the rig’s features is available in our guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LER-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-TPA 102G 4 1 ¹⁄₄ 245 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-TPA 102KF 4 1 ¹⁄₄ 245 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-TPA 127G 5 1 ¹⁄₄ 275 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-TPA 127KF 5 1 ¹⁄₄ 275 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-TPA 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-TPA 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-TPA 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 ball bearing (C) 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-TPA 200G 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-TPA 200R 8 1 ⁹⁄₁₆ 550 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-TPA 200KA 8 1 ⁹⁄₁₆ 550 ball bearing (C) 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ -
TPA – Rigid casters
Blickle also provides a suitable rigid caster series in addition to the swivel casters:
B series: B series: Pressed steel rigid rig with top plate fitting, medium duty design
A detailed description of this rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-TPA 102G 4 1 ¹⁄₄ 245 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-TPA 102KF 4 1 ¹⁄₄ 245 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-TPA 102KF-12 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-TPA 127G 5 1 ¹⁄₄ 275 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-TPA 127KF 5 1 ¹⁄₄ 275 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-TPA 127KF-12 5 1 ¹⁄₄ 275 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-TPA 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-TPA 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-TPA 200G 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-TPA 200R 8 1 ⁹⁄₁₆ 550 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32