SPO – Wheel and caster series
Stainless steel casters with heavy duty nylon wheel
The wheels in the heavy duty SPO series are made from injection-moulded nylon. They are resistant to a wide variety of aggressive substances. With a hardness of 70 Shore D, the wheels offer a particularly low level of rolling resistance on smooth surfaces. The entire caster is corrosion-resistant when combined with heavy duty stainless steel rigs.
The wheels in the SPO series are particularly well suited for hygiene applications with heavy loads in combination with a stainless steel rig.
-
SPO – Stainless steel swivel casters with plate
As standard, the wheels in the SPO series are available with the following stainless steel rig series with top plate fitting:
LKX series: Stainless steel swivel rig with top plate fitting, heavy duty design
A detailed description of this rig series is available in the guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LKX-SPO 80G 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 plain bore 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LKX-SPO 80XK 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 ball bearing 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LKX-SPO 100G-1 4 1 ⁷⁄₁₆ 770 plain bore 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LKX-SPO 100XK-1 4 1 ⁷⁄₁₆ 770 ball bearing 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LKX-SPO 125G-1 5 1 ⁹⁄₁₆ 770 plain bore 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₈ LKX-SPO 125G-3 5 1 ⁹⁄₁₆ 770 plain bore 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁷⁄₈ LKX-SPO 125XK-1 5 1 ⁹⁄₁₆ 770 ball bearing 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₈ LKX-SPO 125XK-3 5 1 ⁹⁄₁₆ 770 ball bearing 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁷⁄₈ LKX-SPO 127G 5 2 1,655 plain bore 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₁₆ LKX-SPO 127XK 5 2 1,655 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₁₆ LKX-SPO 150G 6 2 1,765 plain bore 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₂ LKX-SPO 150XK 6 2 1,765 ball bearing 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₂ LKX-SPO 200G 8 2 1,765 plain bore 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ LKX-SPO 200XK 8 2 1,765 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ -
SPO – Stainless steel rigid casters
Blickle also provides suitable casters with a stainless steel rigid rig for the swivel caster series:
BKX series: Stainless steel heavy duty rigid rig with top plate fitting
A detailed description of the rig series is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BKX-SPO 80G 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 plain bore 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BKX-SPO 80XK 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 ball bearing 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BKX-SPO 100G-1 4 1 ⁷⁄₁₆ 770 plain bore 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BKX-SPO 100XK-1 4 1 ⁷⁄₁₆ 770 ball bearing 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BKX-SPO 125G-1 5 1 ⁹⁄₁₆ 770 plain bore 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BKX-SPO 125G-3 5 1 ⁹⁄₁₆ 770 plain bore 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 125XK-1 5 1 ⁹⁄₁₆ 770 ball bearing 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BKX-SPO 125XK-3 5 1 ⁹⁄₁₆ 770 ball bearing 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 127G 5 2 1,655 plain bore 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 127XK 5 2 1,655 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 150G 6 2 1,765 plain bore 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 150XK 6 2 1,765 ball bearing 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 200G 8 2 1,765 plain bore 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BKX-SPO 200XK 8 2 1,765 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32