POBS – Wheel and caster series
Stainless steel casters with Blickle Besthane® Soft polyurethane tread and nylon wheel center
The wheels in the POBS series use a high-quality nylon wheel center and a high-quality Blickle Besthane® Soft cast polyurethane tread. With a hardness of 75 Shore A, the wheels are especially gentle on the floor and quiet. They are also hydrolysis-resistant and corrosion-resistant.
The POBS casters can be used for a wide range of heavy duty applications where the wheels come into contact with water or water vapour when combined with different stainless steel rigs - such as the food industry.
-
POBS – Stainless steel swivel casters with plate
The wheels in the POBS series are also available as casters with a top plate in combination with different Blickle stainless steel rig series:
LEX series: Stainless steel swivel rig with top plate fitting
LKX series: Stainless steel swivel rig with top plate fitting, heavy duty designThe guide provides a detailed comparison of the stainless steel rig series which are available. The brake system versions available for each base product are covered in greater detail in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LEX-POBS 80XKF 3 ¹⁄₈ 1 ³⁄₁₆ 310 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LEX-POBS 100XKA 4 1 ¹⁄₂ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LKX-POBS 100XKA-1 4 1 ¹⁄₂ 440 ball bearing (C) 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LKX-POBS 100XKA-14 4 1 ¹⁄₂ 440 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ³⁄₄ LEX-POBS 125XKA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LKX-POBS 125XKA-1 5 1 ⁹⁄₁₆ 550 ball bearing (C) 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₈ LKX-POBS 125XKA-3 5 1 ⁹⁄₁₆ 550 ball bearing (C) 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁷⁄₈ LKX-POBS 125XKA-14 5 1 ⁹⁄₁₆ 550 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ⁷⁄₈ LEX-POBS 160XKA 6 ⁵⁄₁₆ 2 660 ball bearing (CC) 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LEX-POBS 160XKA-14 6 ⁵⁄₁₆ 2 660 ball bearing (CC) 7 ¹¹⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LKX-POBS 160XKA 6 ⁵⁄₁₆ 2 880 ball bearing (CC) 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₂ LEX-POBS 200XKA 8 2 660 ball bearing (CC) 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LEX-POBS 200XKA-14 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LKX-POBS 200XKA 8 2 1,100 ball bearing (CC) 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ -
POBS – Stainless steel rigid casters
The POBS wheel series is available with the following stainless steel rigid rigs corresponding to the swivel casters with top plate fitting:
BESX series: Stainless steel rigid rig with top plate fitting
BX series: Stainless steel rigid rig with top plate fitting
BKX series: Stainless steel heavy duty rigid rig with top plate fitting
BKSX series: Stainless steel rigid rig with top plate fitting, heavy duty designA detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BKSX-POBS 100XKA-14 4 1 ¹⁄₂ 440 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BKSX-POBS 125XKA-14 5 1 ⁹⁄₁₆ 550 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BESX-POBS 160XKA-14 6 ⁵⁄₁₆ 2 660 ball bearing (CC) 7 ¹¹⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BESX-POBS 200XKA-14 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3