Premium rubber wheels and rubber wheel casters - GEV series
With elastic solid rubber tires and cast iron wheel center
The high quality elastic solid rubber tires in the GEV series are steel-wire reinforced and have a hardness of 65 Shore A. The wheel center with a grease nipple is made from rugged gray cast iron. In addition to a low level of rolling resistance, the wheels are quiet and provide good floor preservation. The wheels can also be used for higher speeds up to 10 mph with a reduced load capacity.
The GEV wheel series is also available as a drive wheel (GEVN series) or as a hub fitting wheel (GEVA series) .
-
GEV – Wheels
The wheels in the GEV series come in sizes ranging between 10 and 24 ⁷⁄₁₆ inch in diameter as standard along with a ball bearing.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Load capacity
at 6 mph
[lbs]Load capacity
at 10 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]GEV 254/30K 10 8 ¹⁄₈ 2,800 1,930 1,765 ball bearing 1 ³⁄₁₆ 5 ¹⁄₈ GEV 280/25K 11 3 1,920 1,280 970 ball bearing 1 3 ⁹⁄₁₆ GEV 302/35K 12 3 ⁹⁄₁₆ 2,380 1,585 1,190 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆ GEV 360/30K 14 ³⁄₁₆ 2 ³⁄₈ 1,985 1,325 990 ball bearing 1 ³⁄₁₆ 3 GEV 362/35K 14 ³⁄₁₆ 3 2,515 1,675 1,255 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆ GEV 400/30K 15 ³⁄₄ 3 2,645 1,765 1,325 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆ GEV 405/45K 15 ¹⁵⁄₁₆ 8 ¹⁄₈ 3,970 2,645 1,985 ball bearing 1 ³⁄₄ 5 ¹⁄₈ GEV 425/45K 16 ⁶⁄₈ 6 4,760 3,195 2,425 ball bearing 1 ³⁄₄ 6 GEV 500/35K 19 ¹¹⁄₁₆ 3 ³⁄₈ 3,440 2,315 1,720 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆ GEV 520/40K 20 ¹⁄₂ 4 4,035 2,700 2,030 ball bearing 1 ⁹⁄₁₆ 4 GEV 550/60K 21 ⁵⁄₈ 6 ⁵⁄₁₆ 5,950 3,970 2,975 ball bearing 2 ³⁄₈ 6 ⁵⁄₁₆ GEV 610/60K 24 6 5,950 3,970 2,975 ball bearing 2 ³⁄₈ 6 GEV 620/65K 24 ⁷⁄₁₆ 8 10,010 6,845 6,250 ball bearing 2 ⁹⁄₁₆ 8 -
GEV – Swivel casters with plate
Wheels in the GEV series are available with a welded steel rig:
LS series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head
The brake system versions available for each base product are listed in the relevant section. A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LS-GEV 302K 12 3 ⁹⁄₁₆ 2,380 ball bearing 14 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 3 ³⁄₈ LS-GEV 400K 15 ³⁄₄ 3 2,645 ball bearing 18 ¹⁄₂ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 4 LS-GEV 520K 20 ¹⁄₂ 4 4,035 ball bearing 22 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 5 LS-GEV 620K 24 ⁷⁄₁₆ 8 10,010 ball bearing 27 ¹⁵⁄₁₆ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 5 ¹⁄₈ -
GEV – Rigid casters
Blickle also provides a caster with a rigid rig to match the welded steel swivel caster:
BS series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design
A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BS-GEV 302K 12 3 ⁹⁄₁₆ 2,380 ball bearing 14 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 BS-GEV 400K 15 ³⁄₄ 3 2,645 ball bearing 18 ¹⁄₂ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 BS-GEV 520K 20 ¹⁄₂ 4 4,035 ball bearing 22 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 BS-GEV 620K 24 ⁷⁄₁₆ 8 10,010 ball bearing 27 ¹⁵⁄₁₆ 9 ¹³⁄₁₆ x 10 ⁵⁄₈ 8 9/32 x 6 5/16