GEV – Wheel and caster series

Heavy duty wheels and casters with elastic solid rubber tires and cast iron wheel center

The high quality elastic solid rubber tires in the GEV series are steel-wire reinforced and have a hardness of 65 Shore A. The wheel center with a grease nipple is made from rugged gray cast iron. In addition to a low level of rolling resistance, the wheels are quiet and provide good floor preservation. The wheels can also be used for higher speeds up to 10 mph with a reduced load capacity.

The GEV wheel series is also available as a drive wheel (GEVN series) or as a hub fitting wheel (GEVA series) .

  • GEV – Wheels

    The wheels in the GEV series come in sizes ranging between 10 and 24 ⁷⁄₁₆ inch in diameter as standard along with a ball bearing.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Load capacity
    at 6 mph
    [lbs]
    Load capacity
    at 10 mph
    [lbs]
    Bearing type


    Axle bore Ø

    [inch]
    Hub
    length
    [inch]
    GEV 254/30K 10 8 ¹⁄₈ 2,800 1,930 1,765 ball bearing 1 ³⁄₁₆ 5 ¹⁄₈
    GEV 280/25K 11 3 1,920 1,280 970 ball bearing 1 3 ⁹⁄₁₆
    GEV 302/35K 12 3 ⁹⁄₁₆ 2,380 1,585 1,190 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆
    GEV 360/30K 14 ³⁄₁₆ 2 ³⁄₈ 1,985 1,325 990 ball bearing 1 ³⁄₁₆ 3
    GEV 362/35K 14 ³⁄₁₆ 3 2,515 1,675 1,255 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆
    GEV 400/30K 15 ³⁄₄ 3 2,645 1,765 1,325 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆
    GEV 405/45K 15 ¹⁵⁄₁₆ 8 ¹⁄₈ 3,970 2,645 1,985 ball bearing 1 ³⁄₄ 5 ¹⁄₈
    GEV 425/45K 16 ⁶⁄₈ 6 4,760 3,195 2,425 ball bearing 1 ³⁄₄ 6
    GEV 500/35K 19 ¹¹⁄₁₆ 3 ³⁄₈ 3,440 2,315 1,720 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆
    GEV 520/40K 20 ¹⁄₂ 4 4,035 2,700 2,030 ball bearing 1 ⁹⁄₁₆ 4
    GEV 550/60K 21 ⁵⁄₈ 6 ⁵⁄₁₆ 5,950 3,970 2,975 ball bearing 2 ³⁄₈ 6 ⁵⁄₁₆
    GEV 610/60K 24 6 5,950 3,970 2,975 ball bearing 2 ³⁄₈ 6
    GEV 620/65K 24 ⁷⁄₁₆ 8 10,010 6,845 6,250 ball bearing 2 ⁹⁄₁₆ 8
  • GEV – Swivel casters with plate

    Wheels in the GEV series are available with a welded steel rig:

    LS series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head

    The brake system versions available for each base product are listed in the relevant section. A detailed description of the rig series is available in our guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    LS-GEV 302K 12 3 ⁹⁄₁₆ 2,380 ball bearing 14 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 3 ³⁄₈
    LS-GEV 400K 15 ³⁄₄ 3 2,645 ball bearing 18 ¹⁄₂ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 4
    LS-GEV 520K 20 ¹⁄₂ 4 4,035 ball bearing 22 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 5
    LS-GEV 620K 24 ⁷⁄₁₆ 8 10,010 ball bearing 27 ¹⁵⁄₁₆ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 5 ¹⁄₈
  • GEV – Rigid casters

    Blickle also provides a caster with a rigid rig to match the welded steel swivel caster:

    BS series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design

    A detailed description of the rig series is available in our guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    BS-GEV 302K 12 3 ⁹⁄₁₆ 2,380 ball bearing 14 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4
    BS-GEV 400K 15 ³⁄₄ 3 2,645 ball bearing 18 ¹⁄₂ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4
    BS-GEV 520K 20 ¹⁄₂ 4 4,035 ball bearing 22 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4
    BS-GEV 620K 24 ⁷⁄₁₆ 8 10,010 ball bearing 27 ¹⁵⁄₁₆ 9 ¹³⁄₁₆ x 10 ⁵⁄₈ 8 9/32 x 6 5/16