POW – Wheel and caster series
Nylon wheels and casters with rubber damping ring
The wheels in the POW series are made from high-quality injection-moulded nylon. With a hardness of 70 Shore D, the wheels offer a particularly low level of rolling resistance on smooth surfaces and a high level of abrasion resistance. The elastic solid rubber damping ring reduces operating noise by up to 10 dB compared to other nylon wheels and casters.
The POW series is used when reduced noise emissions are required for typical applications for nylon wheels, such as the food industry oder der hygienic environments.
-
POW – Wheels
The wheels in the POW series have diameters ranging between 4 and 5 inch as standard and come with a ball bearing. The wheels have a thread guard as standard, which is also available with an additional ball bearing seal.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]POW 100/10KF 4 1 ³⁄₈ 440 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ POW 100/8KF 4 1 ³⁄₈ 440 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POW 100/8KFD 4 1 ³⁄₈ 440 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POW 125/10KF 5 1 ³⁄₈ 485 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ POW 125/8KF 5 1 ³⁄₈ 485 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ POW 125/8KFD 5 1 ³⁄₈ 485 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ -
POW – Swivel casters with plate
The POW wheel series is available with a variety of rigs with a plate fitting for a wide range of applications as standard. These vary in terms of their design:
L series: Pressed steel swivel rig with top plate fitting, medium duty design
LK series: Pressed steel swivel rig with top plate fitting, heavy duty designA detailed description and a comparison of both rig series are available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]L-POW 100KF-12 4 1 ³⁄₈ 440 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ L-POW 100KF 4 1 ³⁄₈ 440 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LK-POW 100KF-1 4 1 ³⁄₈ 440 ball bearing (C) 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LK-POW 100KF-3 4 1 ³⁄₈ 440 ball bearing (C) 5 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄ L-POW 125KF-12 5 1 ³⁄₈ 485 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ¹⁄₂ L-POW 125KF 5 1 ³⁄₈ 485 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LK-POW 125KF-1 5 1 ³⁄₈ 485 ball bearing (C) 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₈ LK-POW 125KF-3 5 1 ³⁄₈ 485 ball bearing (C) 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁷⁄₈ -
POW – Rigid casters
Blickle also provides suitable rigid casters in addition to swivel casters.
B series: Pressed steel rigid rig with top plate fitting, medium duty design
BK series: Pressed steel rigid rig with top plate fitting, heavy duty designA detailed description of both rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-POW 100KF 4 1 ³⁄₈ 440 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-POW 100KF-12 4 1 ³⁄₈ 440 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BK-POW 100KF-1 4 1 ³⁄₈ 440 ball bearing (C) 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-POW 100KF-3 4 1 ³⁄₈ 440 ball bearing (C) 5 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-POW 125KF 5 1 ³⁄₈ 485 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-POW 125KF-12 5 1 ³⁄₈ 485 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BK-POW 125KF-1 5 1 ³⁄₈ 485 ball bearing (C) 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-POW 125KF-3 5 1 ³⁄₈ 485 ball bearing (C) 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32