Compact caster series
Small casters with a high load capacity
The Blickle compact casters are available as single casters with a bolt hole or top plate fitting. Twin compact casters are available with a top plate fitting or a steel threaded pin. The single compact casters are frequently used in combination with the VSTH wheel series with a polyurethane tread, nylon POA and PO, compressed cast nylon GSPO, POEV with elastic solid rubber or steel SVS. The twin compact casters also use the heavy duty nylon SPO wheel series, the SE series with an elastic solid rubber tread, and ALTH and ALST series with a polyurethane tread and aluminum wheel center.
-
Compact casters with top plate fitting
The Blickle compact casters are available with the following rig series with top plate fitting in combination with the POEV, VSTH, POA, PO or GSPO wheel series:
LPA/LKPA series: Light duty swivel rig with top plate fitting
LE series: Pressed steel swivel caster with top plate fitting
L series: Pressed steel swivel rig with top plate fitting, medium duty design
LK series: Pressed steel swivel rig with top plate fitting, heavy duty design
LH series: Pressed steel swivel rig with top plate fitting, heavy duty designA detailed description and a comparison of the rig series are available in our guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LPA-POA 35G 1 ³⁄₈ 1 165 plain bore 2 ¹⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁹⁄₁₆ LPA-VSTH 35K 1 ³⁄₈ 1 ¹⁄₁₆ 220 ball bearing 2 ¹⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁹⁄₁₆ LPA-GSPO 35K 1 ³⁄₈ 1 ¹⁄₈ 220 ball bearing 2 ¹⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁹⁄₁₆ LKPA-POA 52G 2 1 ¹⁄₈ 265 plain bore 2 ⁷⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ¹⁄₈ LKPA-GSPO 50K 2 1 ¹⁄₄ 330 ball bearing 2 ⁷⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ¹⁄₈ LKPA-VSTH 50K 2 1 ⁵⁄₁₆ 330 ball bearing 2 ⁷⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ¹⁄₈ LE-PO 60G 2 ³⁄₈ 1 ¹⁄₈ 330 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ LE-PO 60KF 2 ³⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ L-GSPO 60K 2 ³⁄₈ 1 ¹⁄₄ 550 ball bearing 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ LE-POEV 60KF 2 ³⁄₈ 1 ⁵⁄₁₆ 265 ball bearing (CC) 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ L-VSTH 60K 2 ³⁄₈ 1 ³⁄₈ 440 ball bearing 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ LH-VSTH 62K 2 ³⁄₈ 2 ³⁄₈ 705 ball bearing 3 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-GSPO 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 1,435 ball bearing 3 ¹³⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-SVS 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 1,545 ball bearing 3 ¹³⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LK-GSPO 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 770 ball bearing 3 ⁹⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LK-VSTH 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 550 ball bearing 3 ⁹⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LH-SPO 75G 3 1 ¹⁄₄ 660 plain bore 4 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-SPO 75K 3 1 ¹⁄₄ 660 ball bearing 4 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-SPO 80K 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-GSPO 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 1,545 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-SVS 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 1,545 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-VSTH 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 615 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-SPO 82K 3 ¹⁄₈ 2 ³⁄₄ 1,435 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LH-VSTH 82K 3 ¹⁄₈ 2 ³⁄₄ 1,100 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ -
Compact casters with bolt hole
Blickle compact casters are also available with a bolt hole fitting as an alternative to a plate fitting:
LRA/LKRA series: Light duty swivel rig with bolt hole
LER series: Pressed steel swivel caster with bolt hole
LR series: Pressed steel swivel rig with bolt hole, medium duty design
LKR series: Pressed steel swivel rig with bolt hole, heavy duty designThese rigs are combined with the wheels in the POEV, VSTH, POA, PO or GSPO series.
The guide provides a detailed comparison of the rig series which are available. The brake system versions available for each base product are covered in greater detail in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LRA-POA 35G 1 ³⁄₈ 1 165 plain bore 1 ¹⁵⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁹⁄₁₆ LRA-VSTH 35K 1 ³⁄₈ 1 ¹⁄₁₆ 220 ball bearing 1 ¹⁵⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁹⁄₁₆ LRA-GSPO 35K 1 ³⁄₈ 1 ¹⁄₈ 220 ball bearing 1 ¹⁵⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁹⁄₁₆ LKRA-POA 52G 2 1 ¹⁄₈ 265 plain bore 2 ³⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ¹⁄₈ LKRA-GSPO 50K 2 1 ¹⁄₄ 330 ball bearing 2 ³⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ¹⁄₈ LKRA-VSTH 50K 2 1 ⁵⁄₁₆ 330 ball bearing 2 ³⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ¹⁄₈ LER-PO 60G 2 ³⁄₈ 1 ¹⁄₈ 330 plain bore 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ LR-GSPO 60K 2 ³⁄₈ 1 ¹⁄₄ 550 ball bearing 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ LER-PO 60KF 2 ³⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ LER-POEV 60KF 2 ³⁄₈ 1 ⁵⁄₁₆ 265 ball bearing (CC) 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ LR-VSTH 60K 2 ³⁄₈ 1 ³⁄₈ 440 ball bearing 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ LKR-GSPO 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 770 ball bearing 3 ⁷⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁵⁄₈ LKR-VSTH 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ ball bearing 3 ⁷⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁵⁄₈ -
Compact casters with rigid rig
The POEV, VSTH, POA, PO or GSPO wheel series are available with rigid rigs corresponding to the compact casters with top plate fitting:
B series: Pressed steel rigid rig with top plate fitting, medium duty design
BK series: Pressed steel rigid rig with top plate fitting, heavy duty design
BH series: Pressed steel rigid rig with top plate fitting, heavy duty designA detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-PO 60G 2 ³⁄₈ 1 ¹⁄₈ 330 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-GSPO 60K 2 ³⁄₈ 1 ¹⁄₄ 550 ball bearing 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PO 60KF 2 ³⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-POEV 60KF 2 ³⁄₈ 1 ⁵⁄₁₆ 265 ball bearing (CC) 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-VSTH 60K 2 ³⁄₈ 1 ³⁄₈ 440 ball bearing 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-GSPO 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 1,435 ball bearing 3 ¹³⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-SVS 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 1,545 ball bearing 3 ¹³⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-GSPO 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 770 ball bearing 3 ⁹⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-VSTH 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 550 ball bearing 3 ⁹⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-SPO 75G 3 1 ¹⁄₄ 660 plain bore 4 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-SPO 75K 3 1 ¹⁄₄ 660 ball bearing 4 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-SPO 80K 3 ¹⁄₈ 1 ⁷⁄₁₆ 770 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-GSPO 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 1,545 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-SVS 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 1,545 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BH-VSTH 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 615 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 -
LD, LHD and LSD series twin wheel compact casters
The twin wheel compact casters are available with three different rig versions. These are combined with seven different wheel series made of nylon, with either a polyurethane tread or an elastic solid rubber tread.
LD series: Pressed steel twin wheel compact caster with threaded pin
LHD series: Heavy duty pressed steel twin wheel compact caster with top plate fitting
LSD series: Heavy duty welded steel twin wheel compact caster with top plate fittingA detailed description and a comparison of the rig series are available in our guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Number of
wheels
Total caster
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Thread
Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LD-POA 52G 2 1 ¹⁄₈ 2 3 ³⁄₄ 465 plain bore 2 ³⁄₁₆ M16 1 ⁹⁄₁₆ LD-VSTH 50K 2 1 ⁵⁄₁₆ 2 3 ¹⁵⁄₁₆ 550 ball bearing 2 ³⁄₁₆ M16 1 ⁹⁄₁₆ LD-PO 60G 2 ³⁄₈ 1 ¹⁄₈ 2 4 ¹⁄₈ 550 plain bore 2 ⁹⁄₁₆ M16 1 ⁹⁄₁₆ LHD-GSPO 60K 2 ³⁄₈ 1 ¹⁄₄ 2 1,390 ball bearing 3 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LD-POEV 60KF 2 ³⁄₈ 1 ⁵⁄₁₆ 2 4 ¹⁄₈ 530 ball bearing (CC) 2 ⁹⁄₁₆ M16 1 ⁹⁄₁₆ LHD-POEV 60KF 2 ³⁄₈ 1 ⁵⁄₁₆ 2 465 ball bearing (CC) 3 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LD-VSTH 60K 2 ³⁄₈ 1 ³⁄₈ 2 4 ¹⁄₈ 550 ball bearing 2 ⁹⁄₁₆ M16 1 ⁹⁄₁₆ LHD-VSTH 60K 2 ³⁄₈ 1 ³⁄₈ 2 795 ball bearing 3 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LHD-SPO 75K 3 1 ¹⁄₄ 2 1,190 ball bearing 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LHD-ALBS 80K 3 ¹⁄₈ 1 ³⁄₁₆ 2 795 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LHD-ALST 80K 3 ¹⁄₈ 1 ³⁄₁₆ 2 795 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LHD-ALTH 80K 3 ¹⁄₈ 1 ³⁄₁₆ 2 795 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LHD-POEV 80KF 3 ¹⁄₈ 1 ¹⁄₄ 2 550 ball bearing (C) 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LHD-VSTH 80K-3 3 ¹⁄₈ 1 ⁹⁄₁₆ 2 1,100 ball bearing 4 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄ LSD-GSPO 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 2 3,860 ball bearing 4 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁹⁄₁₆ LHD-SE 80K-3 3 ¹⁄₈ 1 ³⁄₄ 2 795 ball bearing 4 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄