PATH – Wheel and caster series
Wheels and casters with thermoplastic polyurethane tread and nylon wheel center
Wheels and casters in the PATH series consist of a high-quality thermoplastic polyurethane tread (TPU) and an impact-resistant nylon wheel center. The tread has a hardness of 94 Shore A and is cast onto the wheel center. It is non-marking and non-staining. The tread has a very low level of rolling and swivel resistance, while also being highly abrasion-resistant.
The PATH series is frequently used for hygiene applications. The electrically conductive version is frequently used for medical devices to protect them against electric discharge.
The POTH series is preferred for higher load capacities.
-
PATH – Wheels
The wheels in the PATH series come in sizes ranging between 3 ¹⁄₈ and 8 inch in diameter as standard. They are also available with a ball bearing, roller bearing or plain bore. Electrically conductive versions are also available, in addition to versions with a thread guard and sealed ball bearing.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]PATH 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore ¹⁄₂ 1 ³⁄₈ PATH 80/8KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ PATH 100/12G 4 1 ¹⁄₄ 440 plain bore ¹⁄₂ 1 ³⁄₄ PATH 100/10KF 4 1 ¹⁄₄ 440 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ PATH 100/8KF 4 1 ¹⁄₄ 440 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ PATH 125/12G 5 1 ¹⁄₄ 550 plain bore ¹⁄₂ 1 ³⁄₄ PATH 125/10KF 5 1 ¹⁄₄ 550 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ PATH 125/8KF 5 1 ¹⁄₄ 550 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ PATH 160/20G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 plain bore ¹³⁄₁₆ 2 ³⁄₈ PATH 160/20R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 roller bearing ¹³⁄₁₆ 2 ³⁄₈ PATH 160/12KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 ball bearing (C) ¹⁄₂ 2 ⁷⁄₁₆ PATH 160/20KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 ball bearing (C) ¹³⁄₁₆ 2 ³⁄₈ PATH 200/20G 8 1 ⁹⁄₁₆ 1,100 plain bore ¹³⁄₁₆ 2 ³⁄₈ PATH 200/20R 8 1 ⁹⁄₁₆ 1,100 roller bearing ¹³⁄₁₆ 2 ³⁄₈ PATH 200/12KA 8 1 ⁹⁄₁₆ 1,100 ball bearing (C) ¹⁄₂ 2 ⁷⁄₁₆ PATH 200/20KA 8 1 ⁹⁄₁₆ 1,100 ball bearing (C) ¹³⁄₁₆ 2 ³⁄₈ -
PATH – Swivel casters with plate
The PATH wheel series is available as standard with a variety of rig series with a top plate fitting for a wide range of applications. These range from standard pressed steel swivel casters through to heavy duty pressed steel swivel casters.
LE series: Pressed steel swivel rig with top plate fitting
L series: Pressed steel swivel rig with top plate fitting, medium duty design
LK series: Pressed steel swivel rig with top plate fitting, heavy duty designA detailed description and a comparison of the rig series are available in our guide. The brake systems available for each base product are covered in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LE-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LK-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ L-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LK-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁹⁄₁₆ LK-PATH 80KF-14 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 ⁵⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ⁹⁄₁₆ L-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PATH 100G 4 1 ¹⁄₄ 330 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-PATH 100G 4 1 ¹⁄₄ 440 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LE-PATH 100KF 4 1 ¹⁄₄ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-PATH 100KF 4 1 ¹⁄₄ 440 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-PATH 100KF-12 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ LK-PATH 100KF-1 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ LK-PATH 100KF-3 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ³⁄₄ LK-PATH 100KF-14 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ³⁄₄ LE-PATH 125G 5 1 ¹⁄₄ 330 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PATH 125G 5 1 ¹⁄₄ 550 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PATH 125KF 5 1 ¹⁄₄ 330 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LK-PATH 125KF-1 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₈ LK-PATH 125KF-3 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁷⁄₈ LK-PATH 125KF-14 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ⁷⁄₈ L-PATH 125KF 5 1 ¹⁄₄ 550 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PATH 125KF-12 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ¹⁄₂ LE-PATH 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LK-PATH 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 plain bore 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ L-PATH 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ LE-PATH 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LK-PATH 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 roller bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ L-PATH 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ LE-PATH 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 ball bearing (C) 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LE-PATH 160KA-14 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 ball bearing (C) 7 ¹¹⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LK-PATH 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 ball bearing (C) 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ L-PATH 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 ball bearing (C) 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ LE-PATH 200G 8 1 ⁹⁄₁₆ 660 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LK-PATH 200G 8 1 ⁹⁄₁₆ 1,100 plain bore 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁷⁄₁₆ L-PATH 200G 8 1 ⁹⁄₁₆ 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ LE-PATH 200R 8 1 ⁹⁄₁₆ 660 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LK-PATH 200R 8 1 ⁹⁄₁₆ 1,100 roller bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁷⁄₁₆ L-PATH 200R 8 1 ⁹⁄₁₆ 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ LE-PATH 200KA 8 1 ⁹⁄₁₆ 660 ball bearing (C) 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ LE-PATH 200KA-14 8 1 ⁹⁄₁₆ 660 ball bearing (C) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LK-PATH 200KA 8 1 ⁹⁄₁₆ 1,100 ball bearing (C) 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁷⁄₁₆ L-PATH 200KA 8 1 ⁹⁄₁₆ 880 ball bearing (C) 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ -
PATH – Swivel casters with bolt hole
As an alternative to the plate fitting, the Blickle range also contains a rig series with a bolt hole for the PATH series:
LER series: Pressed steel swivel rig with bolt hole
A detailed description of the LER rig is available in our guide. Suitable brake systems for each base product are covered in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LER-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PATH 100G 4 1 ¹⁄₄ 330 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-PATH 100KF 4 1 ¹⁄₄ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-PATH 125G 5 1 ¹⁄₄ 330 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PATH 125KF 5 1 ¹⁄₄ 330 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PATH 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 plain bore 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PATH 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 roller bearing 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PATH 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 660 ball bearing (C) 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PATH 200G 8 1 ⁹⁄₁₆ 660 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PATH 200R 8 1 ⁹⁄₁₆ 660 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PATH 200KA 8 1 ⁹⁄₁₆ 660 ball bearing (C) 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ -
PATH – Rigid casters
The PATH wheel series can be combined with a wide range of rigid rig series:
B series: Pressed steel rigid rig with top plate fitting, medium duty design
BK series: Pressed steel rigid rig with top plate fitting, heavy duty design
BES series: Pressed steel rigid rig with top plate fitting, heavy duty design
BKS series: Pressed steel rigid rig with top plate fitting, heavy duty design
BH series: Pressed steel rigid rig with top plate fitting, heavy duty designA comparison of these rigid rig series is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 ⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PATH 100G 4 1 ¹⁄₄ 440 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PATH 100KF 4 1 ¹⁄₄ 440 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-PATH 100KF-1 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-PATH 100KF-3 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 100KF-12 4 1 ¹⁄₄ 440 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-PATH 125G 5 1 ¹⁄₄ 550 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PATH 125KF 5 1 ¹⁄₄ 550 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-PATH 125KF-1 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 BK-PATH 125KF-3 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 125KF-12 5 1 ¹⁄₄ 550 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-PATH 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-PATH 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 plain bore 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-PATH 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 roller bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 ball bearing (C) 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-PATH 160KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 880 ball bearing (C) 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 200G 8 1 ⁹⁄₁₆ 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-PATH 200G 8 1 ⁹⁄₁₆ 1,100 plain bore 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 200R 8 1 ⁹⁄₁₆ 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-PATH 200R 8 1 ⁹⁄₁₆ 1,100 roller bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PATH 200KA 8 1 ⁹⁄₁₆ 880 ball bearing (C) 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-PATH 200KA 8 1 ⁹⁄₁₆ 1,100 ball bearing (C) 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32