ESD casters - V-EL series

With standard solid rubber tire and pressed steel rim

Overview of the ESD casters V-EL series

In the V…-EL series, the standard solid rubber tire is either pressed or bolted together with a stamped pressed steel rim and the bearing. Due to the integrated tubular steel hub, the V series is more suitable for heavier loads than the VE series. The 80 Shore A tires provide a high level of operational comfort while also being quiet and providing good floor preservation.
The wheels in the V...-EL series are electrically conductive and have a resistance of ≤ 104 Ω.

As with the other V series, this series is also suitable for any mobile workshop equipment which needs to be electrically conductive.

  • V…-EL – Wheels
    ESD casters V-EL series

    Wheels in the V…-EL series have diameters ranging between 3 ¹⁄₈ and 10 inch and are available with a roller bearing and ball bearing.


    		Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Axle bore Ø

    [inch]    		 Hub
    length
    [inch]
    V 80/12R-EL 3 ¹⁄₈ 1 110 roller bearing ¹⁄₂ 1 ³⁄₈
    V 100/15R-EL 4 1 ³⁄₁₆ 155 roller bearing ⁹⁄₁₆ 1 ³⁄₄
    V 125/15R-EL 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing ⁹⁄₁₆ 1 ²⁵⁄₃₂
    V 140/15R-EL 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing ⁹⁄₁₆ 1 ²⁵⁄₃₂
    V 162/20R-EL 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing ¹³⁄₁₆ 2 ³⁄₈
    V 182/20R-EL 7 ¹⁄₁₆ 2 375 roller bearing ¹³⁄₁₆ 2 ³⁄₈
    V 202/20R-EL 8 2 450 roller bearing ¹³⁄₁₆ 2 ³⁄₈
    V 202/25R-EL 8 2 450 roller bearing 1 2 ³⁄₈
    V 200/20K-EL 8 2 450 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    V 252/25R-EL 10 2 ³⁄₈ 650 roller bearing 1 2 ⁹⁄₁₆
    V 250/25K-EL 10 2 ³⁄₈ 650 ball bearing 1 2 ⁹⁄₁₆
    To the product finder
  • V…-EL – Swivel casters with plate
    Swivel casters with plate - ESD casters V-EL series

    Wheels in the V…-EL series are available with the following pressed steel rig as swivel casters with a plate fitting:

    L series: Pressed steel swivel rig with top plate fitting, medium duty design

    A detailed description of the rig series is available in the guide. The brake system versions available for each base product are listed in the relevant section.


    		Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]    		 Offset

    [inch]
    L-V 80R-EL 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-V 100R-EL 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
    L-V 125R-EL 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-V 140R-EL 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2
    L-V 162R-EL 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    L-V 182R-EL 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    L-V 202R-EL 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    L-V 200K-EL 8 2 450 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    L-V 252R-3-EL 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₁₆
    L-V 252R-EL 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 2 ³⁄₄
    To the product finder
  • V…-EL – Rigid casters
    Rigid casters - ESD casters V-EL series

    Blickle also provides suitable casters with rigid rigs for all of the swivel caster series.

    B series: Pressed steel rigid rig with top plate fitting, medium duty design
    BH series: Pressed steel rigid rig with top plate fitting, heavy duty design

    A comparison of the two rigid rig series is available in the guide.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]
    B-V 80R-EL 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-V 100R-EL 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-V 125R-EL 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-V 140R-EL 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-V 162R-EL 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-V 182R-EL 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-V 202R-EL 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-V 200K-EL 8 2 450 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    BH-V 252R-EL 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-V 252R-EL 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32
    To the product finder