PA, VLEA, GEVA, GSTA, GBA – wheel series
Hub fitting wheels
The Blickle standard range includes five series of hub fitting wheels. The wheel centers are made from pressed steel or gray cast iron. The treads are made from the polyurethanes Softhane® and Besthane® or rubber. Depending on the wheel series, the tread / tire is firmly cast, pressed-on or vulcanised to the wheel center or fitted to the pressed steel rim. The PA series offers pneumatic tires in the form of a hub fitting wheel, which provides outstanding floor surface preservation.
Hub fitting wheels are mainly used on industrial trucks and driverless transport systems .They are also used for a variety of mechanical and systems engineering applications.
-
PA, VLEA, GEVA, GSTA, GBA – Wheels
The hub fitting wheel series are available in sizes between 10 inch and 15 ³⁄₄ inch in diameter. Depending on the series, the wheels can transport loads up to 5181 lbs. They are also suitable for use at higher speeds. The PA and VLEA series are suitable for use at speeds of up to 10 mph.
Hub fitting wheels
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Load capacity
at 6 mph
[lbs]Load capacity
at 10 mph
[lbs]Number of
fitting
holesFitting
hole Ø
[inch]Central hole Ø
[inch]PCD
[inch]GEVA 250/4 10 2 ³⁄₈ 1,390 925 705 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 252/4 10 3 ¹⁄₈ 1,785 1,190 905 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 300/4 12 3 1,985 1,325 990 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 300/5 12 3 1,985 1,325 990 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GEVA 302/4 12 3 ⁹⁄₁₆ 2,380 1,585 1,190 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 302/5 12 3 ⁹⁄₁₆ 2,380 1,585 1,190 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GEVA 360/4 14 ³⁄₁₆ 2 ³⁄₈ 1,985 1,325 990 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 360/5 14 ³⁄₁₆ 2 ³⁄₈ 1,985 1,325 990 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GEVA 400/4 15 ³⁄₄ 2 ⁹⁄₁₆ 2,380 1,585 1,190 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 400/5-67 15 ³⁄₄ 2 ⁹⁄₁₆ 2,380 1,585 1,190 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GEVA 400/5-82 15 ³⁄₄ 2 ⁹⁄₁₆ 2,380 1,585 1,190 5 ⁵⁄₈ 3 ¹⁄₄ 5 ¹⁄₈ GEVA 402/4 15 ³⁄₄ 3 2,645 1,765 1,325 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GEVA 402/5-67 15 ³⁄₄ 3 2,645 1,765 1,325 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GEVA 402/5-82 15 ³⁄₄ 3 2,645 1,765 1,325 5 ⁵⁄₈ 3 ¹⁄₄ 5 ¹⁄₈ GEVA 405/5 15 ¹⁵⁄₁₆ 8 ¹⁄₈ 3,970 2,645 1,985 5 ³⁄₄ 4 ⁵⁄₁₆ 5 ¹¹⁄₁₆ GEVA 405/6 15 ¹⁵⁄₁₆ 8 ¹⁄₈ 3,970 2,645 1,985 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆ GEVA 415/6 16 ⁵⁄₁₆ 3 ⁹⁄₁₆ 3,040 2,030 1,520 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆ GEVA 500/6 19 ¹¹⁄₁₆ 3 ³⁄₈ 3,440 2,315 1,720 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆ GEVA 520/6 20 ¹⁄₂ 4 4,035 2,700 2,030 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆ GEVA 620/6 24 ⁷⁄₁₆ 8 10,010 6,845 6,250 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆ GSTA 200/4 8 2 1,545 615 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GSTA 250/4 10 2 ³⁄₈ 1,765 705 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GSTA 252/4 10 3 ¹⁄₈ 2,425 970 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GSTA 302/5 12 3 ¹⁄₈ 3,525 1,410 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GSTA 404/6 15 ³⁄₄ 4 5,510 2,205 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆ GBA 200/4 8 2 1,985 1,390 795 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GBA 250/4 10 2 ³⁄₈ 2,865 2,005 1,145 4 ⁵⁄₈ 2 ³⁄₈ 3 ¹⁵⁄₁₆ GBA 252/5 10 3 ¹⁄₈ 3,525 2,425 1,410 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GBA 302/5 12 3 ⁹⁄₁₆ 4,630 3,195 1,850 5 ⁵⁄₈ 2 ⁵⁄₈ 4 ⁷⁄₁₆ GBA 404/6 15 ³⁄₄ 4 7,495 5,180 2,975 6 ⁷⁄₈ 6 ⁵⁄₁₆ 8 ¹⁄₁₆
Wheel Ø
[inch]Wheel
width
[inch]Tyre dimensions
Rim
dimensions
Ply-
rating
Load capacity
at 2.5 mph
[lbs]Load capacity
at 15,5 mph
[lbs]Tyre pressure
[bar / psi]Number of
fitting
holesFitting
hole Ø
[inch]Central hole Ø
[inch]PCD
[inch]Profile
PA 402/4 15 ³⁄₄ 4 4.00-8 2 550 220 2.0 / 30 4 ⁹⁄₁₆ 2 ³⁄₈ 3 ¹⁵⁄₁₆ zig-zag profile PA 412/4 15 ³⁄₄ 4 4.00-8 4 770 355 3.5 / 50 4 ⁹⁄₁₆ 2 ³⁄₈ 3 ¹⁵⁄₁₆ zig-zag profile PA 420/4 16 ⁵⁄₁₆ 4 ¹⁄₂ 4.00-8 4 1,155 660 3.5 / 50 4 ⁹⁄₁₆ 2 ³⁄₈ 3 ¹⁵⁄₁₆ ribbed profile PA 430/5 16 ⁹⁄₁₆ 4 ¹⁄₂ 4.00-8 6 1,435 1,100 7.0 / 101 5 ³⁄₄ 3 ¹⁄₄ 5 ¹⁄₈ zig-zag profile PA 432/5 16 ⁹⁄₁₆ 4 ¹⁄₂ 4.00-8 8 1,655 1,325 7.0 / 101 5 ³⁄₄ 3 ¹⁄₄ 5 ¹⁄₈ zig-zag profile PA 464/5 18 ¹⁄₈ 5 ¹¹⁄₁₆ 5.00-8 8 2,515 1,700 7.0 / 101 5 ³⁄₄ 3 ¹⁄₄ 5 ¹⁄₈ zig-zag profile PA 536/5 21 ¹⁄₈ 6 ¹⁄₂ 6.00-9 10 2,865 2,315 7.0 / 101 5 ⁵⁄₈ 4 ⁵⁄₁₆ 5 ¹¹⁄₁₆ zig-zag profile VLEA 410/5 15 ¹⁵⁄₁₆ 4 ¹⁄₈ 4.00-8 3.00D-8 2,095 1,610 5 ³⁄₄ 3 ¹⁄₄ 5 ¹⁄₈ VLEA 460/5 17 ¹⁵⁄₁₆ 4 ³⁄₄ 5.00-8 3.00D-8 3,120 2,405 5 ³⁄₄ 3 ¹⁄₄ 5 ¹⁄₈ VLEA 530/5 20 ¹¹⁄₁₆ 5 ¹⁄₂ 6.00-9 4.00E-9 4,155 3,195 5 ⁵⁄₈ 4 ⁵⁄₁₆ 5 ¹¹⁄₁₆