VSVU, VSB – wheel series
Basic wheels
The tread in the VSB and VSVU basic wheel series is directly cast onto a steel wheel centre with a hole. This is made from the high-quality polyurethane-elastomer Blickle Besthane® or Vulkollan® with a hardness of 92 Shore A. The tread has a high dynamic load capacity and can be used at speeds up to 10 mph. It also provides high cut and tear propagation resistance.
The wheel centres of the VSB and VSVU wheel series are easy to machine individually, allowing them to be tailored to specific requirements. The GB or GVU series can be used as a running wheel.
-
VSVU, VSB – Wheels
Wheels in the VSVU and VSB series are available in sizes 125 to 300 mm and have a hole in the wheel center.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Load capacity
at 6 mph
[lbs]Load capacity
at 10 mph
[lbs]Axle bore Ø
[inch]Hub
length
[inch]Internal clamping
surface
[inch]External clamp-
ing surface
[inch]VSB 127/20H7 5 2 1,545 1,080 615 ¹³⁄₁₆ 2 2 ³⁄₄ 3 ¹⁷⁄₃₂ VSVU 127/20H7 5 2 1,545 1,080 615 ¹³⁄₁₆ 2 2 ³⁄₄ 3 ¹⁷⁄₃₂ VSB 150/20H7 6 2 1,765 1,235 705 ¹³⁄₁₆ 2 3 ⁵⁄₃₂ 3 ¹⁵⁄₁₆ VSVU 150/20H7 6 2 1,765 1,235 705 ¹³⁄₁₆ 2 3 ⁵⁄₃₂ 3 ¹⁵⁄₁₆ VSB 160/20H7 6 ⁵⁄₁₆ 2 1,765 1,235 705 ¹³⁄₁₆ 2 3 ¹⁷⁄₃₂ 4 ¹¹⁄₃₂ VSVU 160/20H7 6 ⁵⁄₁₆ 2 1,765 1,235 705 ¹³⁄₁₆ 2 3 ¹⁷⁄₃₂ 4 ¹¹⁄₃₂ VSB 200/20H7 8 2 2,205 1,545 880 ¹³⁄₁₆ 2 4 ¹¹⁄₃₂ 5 ²⁹⁄₃₂ VSVU 200/20H7 8 2 2,205 1,545 880 ¹³⁄₁₆ 2 4 ¹¹⁄₃₂ 5 ²⁹⁄₃₂ VSB 202/20H7 8 3 ¹⁄₈ 3,525 2,535 1,410 ¹³⁄₁₆ 3 ¹⁄₈ 4 ¹¹⁄₃₂ 5 ²⁹⁄₃₂ VSVU 202/20H7 8 3 ¹⁄₈ 3,525 2,535 1,410 ¹³⁄₁₆ 3 ¹⁄₈ 4 ¹¹⁄₃₂ 5 ²⁹⁄₃₂ VSB 251/25H7 10 2 2,755 1,920 1,100 1 2 5 ²⁹⁄₃₂ 7 ¹⁵⁄₃₂ VSVU 251/25H7 10 2 2,755 1,920 1,100 1 2 5 ²⁹⁄₃₂ 7 ¹⁵⁄₃₂ VSB 252/25H7 10 3 ¹⁄₈ 3,970 2,755 1,585 1 3 ¹⁄₈ 5 ²⁹⁄₃₂ 7 ¹⁵⁄₃₂ VSVU 252/25H7 10 3 ¹⁄₈ 3,970 2,755 1,585 1 3 ¹⁄₈ 5 ²⁹⁄₃₂ 7 ¹⁵⁄₃₂ VSB 302/30H7 12 3 ¹⁄₈ 5,290 3,640 2,115 1 ³⁄₁₆ 3 ¹⁄₈ 5 ²⁹⁄₃₂ 9 ¹⁄₁₆ VSVU 302/30H7 12 3 ¹⁄₈ 5,290 3,640 2,115 1 ³⁄₁₆ 3 ¹⁄₈ 5 ²⁹⁄₃₂ 9 ¹⁄₁₆