VSB – Wheel and caster series
Heavy duty wheels and casters with Blickle Besthane® polyurethane tread and steel wheel center
The wheels in the VSB series use a steel wheel center and a high-quality Blickle Besthane® polyurethane tread. With a hardness of 92 Shore A, the wheels are extremely abrasion- and wear-resistant.
Thanks to their robust design, the VSB series is also suitable for carrying heavy loads, even with a very small wheel diameter.
-
VSB – Wheels
The VSB wheel series is only available with a wheel diameter of 3 ¹⁄₈ inch. The wheel has a ball bearing and is suitable for load capacities up to 1102 lbs.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]VSB 82/20K 3 ¹⁄₈ 2 ³⁄₄ 1,100 ball bearing ¹³⁄₁₆ 2 ³⁄₄ -
VSB – Swivel casters with plate
Wheels in the VSB series are also available as a swivel caster in combination with a pressed steel rig:
LH series: Pressed steel swivel rig with top plate fitting, heavy duty design
Refer to our guide for more information about this rig series.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LH-VSB 82K 3 ¹⁄₈ 2 ³⁄₄ 1,100 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄