GST – Wheel and caster series

Heavy duty wheels and casters with Blickle Softhane® polyurethane tread and cast iron wheel center

The tread of the heavy duty wheels and casters in the GST series is made using the high-quality polyurethane-elastomer Blickle Softhane®. This is cast onto a wheel center made of rugged gray cast iron. The extra-thick tread with a hardness of 75 Shore A provides good floor surface preservation and smooth rolling performance.

The wheels of the GST series are primarily used in intralogistics when transporting heavy loads on uneven surfaces.

  • GST – Wheels

    The GST series has diameters ranging between 5 and 15 ³⁄₄ inch as standard and are available with a ball bearing. An antistatic version with a gray tread is also available. The wheels are also available as a drive wheel GSTN (series) or a hub fitting wheel GSTA (series) .


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Load capacity
    at 6 mph
    [lbs]
    Bearing type


    Axle bore Ø

    [inch]
    Hub
    length
    [inch]
    GST 127/20K 5 2 992 397 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    GST 150/20K 6 2 1257 485 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    GST 160/20K 6 ⁵⁄₁₆ 2 1323 529 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    GST 200/20K 8 2 1764 705 ball bearing ¹³⁄₁₆ 2 ³⁄₈
    GST 200/25K 8 2 1764 705 ball bearing 1 2 ³⁄₈
    GST 202/25K 8 3 ¹⁄₈ 2646 1058 ball bearing 1 3 ⁹⁄₁₆
    GST 202/35K 8 3 ¹⁄₈ 2646 1058 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆
    GST 250/25K 10 2 ³⁄₈ 2646 1058 ball bearing 1 2 ³⁄₄
    GST 250/35K 10 2 ³⁄₈ 2646 1058 ball bearing 1 ³⁄₈ 2 ³⁄₄
    GST 252/25K 10 3 ¹⁄₈ 3086 1235 ball bearing 1 3 ⁹⁄₁₆
    GST 252/30K 10 3 ¹⁄₈ 3086 1235 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆
    GST 302/30K 12 3 ¹⁄₈ 3968 1499 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆
    GST 302/35K 12 3 ¹⁄₈ 3968 1499 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆
    GST 304/35K 12 4 4960 1852 ball bearing 1 ³⁄₈ 4 ³⁄₄
    GST 404/40K 15 ³⁄₄ 4 6614 2425 ball bearing 1 ⁹⁄₁₆ 4 ³⁄₄
  • GST – Swivel casters with plate

    The wheels in the GST series are available in combination with various Blickle rig series with a top plate fitting. These rig series range from medium duty pressed steel swivel rigs through to heavy duty swivel rigs in welded steel:

    LH series: Pressed steel swivel rig with top plate fitting, heavy duty design
    LUH series: Pressed steel swivel rig with top plate fitting, heavy duty enclosed design
    LO series: Heavy duty welded steel swivel rig with top plate fitting
    LS series: Heavy-duty welded steel swivel rig, heavy-duty swivel head

    The guide provides a detailed comparison of the rig series which are available. The brake system versions available for each base product are covered in the relevant section.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    LH-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₁₆
    LO-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2
    LS-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2
    LUH-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₁₆
    LS-GST 127K-16 5 2 992 ball bearing 6 ¹¹⁄₁₆ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 ⁹⁄₁₆ 2
    LH-GST 150K 6 2 1257 ball bearing 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ⁹⁄₁₆
    LO-GST 150K 6 2 1257 ball bearing 7 ⁷⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₁₆
    LS-GST 150K 6 2 1257 ball bearing 7 ⁷⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₁₆
    LUH-GST 150K 6 2 1257 ball bearing 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₈
    LS-GST 150K-16 6 2 1257 ball bearing 7 ⁷⁄₈ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 ⁹⁄₁₆ 2 ³⁄₁₆
    LH-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ⁹⁄₁₆
    LO-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₁₆
    LS-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₁₆
    LUH-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₈
    LH-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₄
    LO-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₈
    LS-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₈
    LUH-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ¹⁄₂
    LS-GST 200K-16 8 2 1764 ball bearing 9 ⁵⁄₈ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 ⁹⁄₁₆ 2 ³⁄₈
    LH-GST 202K 8 3 ¹⁄₈ 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₄
    LO-GST 202K 8 3 ¹⁄₈ 2425 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ⁹⁄₁₆
    LS-GST 202K 8 3 ¹⁄₈ 2646 ball bearing 10 ¹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 2 ⁹⁄₁₆
    LH-GST 250K 10 2 ³⁄₈ 1984 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 3 ¹⁄₄
    LO-GST 250K 10 2 ³⁄₈ 2646 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈ 2 ³⁄₄
    LS-GST 250K 10 2 ³⁄₈ 2646 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 3
    LS-GST 252K 10 3 ¹⁄₈ 3086 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 3
    LS-GST 302K 12 3 ¹⁄₈ 3968 ball bearing 14 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 3 ³⁄₈
    LS-GST 304K 12 4 4960 ball bearing 14 ⁹⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 ⁹⁄₁₆ 3 ³⁄₈
  • GST – Rigid casters

    The GST wheel series can be combined with the following rigid rigs:

    BH series: Pressed steel rigid rig with top plate fitting, heavy duty design
    BO series: Heavy duty welded steel rigid rig with top plate fitting
    BS series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design

    A detailed description of the differences between the rig series is provided in the guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    BH-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BO-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 127K 5 2 992 ball bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 127K-16 5 2 992 ball bearing 6 ¹¹⁄₁₆ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 ⁹⁄₁₆
    BH-GST 150K 6 2 1257 ball bearing 7 ³⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BO-GST 150K 6 2 1257 ball bearing 7 ⁷⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 150K 6 2 1257 ball bearing 7 ⁷⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 150K-16 6 2 1257 ball bearing 7 ⁷⁄₈ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 ⁹⁄₁₆
    BH-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 7 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BO-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 160K 6 ⁵⁄₁₆ 2 1323 ball bearing 8 ¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BH-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BO-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 200K 8 2 1764 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 200K-16 8 2 1764 ball bearing 9 ⁵⁄₈ 6 ¹⁄₄ x 4 ¹⁄₂ 2 7/16 x 4 15/16 / 3 3/8 x 5 1/4 ⁹⁄₁₆
    BS-GST 202K 8 3 ¹⁄₈ 2646 ball bearing 10 ¹⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    BO-GST 202K 8 3 ¹⁄₈ 2756 ball bearing 9 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BH-GST 250K 10 2 ³⁄₈ 1984 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BO-GST 250K 10 2 ³⁄₈ 2646 ball bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 ³⁄₈
    BS-GST 250K 10 2 ³⁄₈ 2646 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    BS-GST 252K 10 3 ¹⁄₈ 3086 ball bearing 12 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    BS-GST 302K 12 3 ¹⁄₈ 3968 ball bearing 14 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    BS-GST 304K 12 4 4960 ball bearing 14 ⁹⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 ⁹⁄₁₆
  • GST – Twin casters

    The wheels in the GST series are available as twin casters in combination with the welded steel LSD and BSD rig series:

    LSD series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head
    BSD series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design

    The specific features of each rig series are covered in detail in the guide. The brake system versions available for each base product are listed in the relevant section.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Number of
    wheels

    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    BSD-GST 127K 5 2 2 1984 ball bearing 7 ⁵⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    LSD-GST 127K 5 2 2 1984 ball bearing 7 ⁵⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 2
    BSD-GST 150K-35 6 2 2 2425 ball bearing 8 ⁷⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    LSD-GST 150K-35 6 2 2 2425 ball bearing 8 ⁷⁄₁₆ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 2 ³⁄₁₆
    BSD-GST 200K-35 8 2 2 3527 ball bearing 10 ¹⁄₄ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆
    LSD-GST 200K-35 8 2 2 3527 ball bearing 10 ¹⁄₄ 6 ⁷⁄₈ x 5 ¹⁄₂ 5 1/2 x 4 1/8 ⁹⁄₁₆ 2 ³⁄₈
    BSD-GST 202K 8 3 ¹⁄₈ 2 5291 ball bearing 11 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆
    LSD-GST 202K 8 3 ¹⁄₈ 2 5291 ball bearing 11 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆ 2 ³⁄₈
    BSD-GST 250K 10 2 ³⁄₈ 2 5291 ball bearing 13 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆
    LSD-GST 250K 10 2 ³⁄₈ 2 5291 ball bearing 13 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆ 2 ³⁄₄
    BSD-GST 252K 10 3 ¹⁄₈ 2 6173 ball bearing 13 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆
    LSD-GST 252K 10 3 ¹⁄₈ 2 6173 ball bearing 13 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆ 2 ³⁄₄
    BSD-GST 302K 12 3 ¹⁄₈ 2 7937 ball bearing 15 ³⁄₈ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆
    LSD-GST 302K 12 3 ¹⁄₈ 2 7937 ball bearing 15 ³⁄₈ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆ 3 ¹⁄₈
    BSD-GST 304K 12 4 2 9921 ball bearing 15 ³⁄₈ 11 ¹³⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆
    LSD-GST 304K 12 4 2 9921 ball bearing 15 ³⁄₈ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 ¹¹⁄₁₆ 3 ¹⁄₈
    BSD-GST 404K-42 15 ³⁄₄ 4 2 13228 ball bearing 20 ⁷⁄₈ 15 ³⁄₄ x 11 ¹³⁄₁₆ 13 3/8 x 9 7/16 1
    LSD-GST 404K-42 15 ³⁄₄ 4 2 13228 ball bearing 20 ⁷⁄₈ 15 ³⁄₄ x 11 ¹³⁄₁₆ 13 3/8 x 9 7/16 1 5