TPA – Wheel and caster series
Light duty wheels and casters with thermoplastic rubber tread and polypropylene wheel center
The tread of the wheels and casters in the TPA series is made from a high-quality thermoplastic rubber-elastomer. This has a hardness of 75 Shore A and is cast onto a polypropylene wheel center. The tread is non-marking and forms a strong, unbreakable bond with the wheel center. The TPA series is characterised by very low rolling and swivel resistance.
TPA wheels and casters are frequently used in retail facilities and display stands. They are also used for medical equipment, measurement and testing equipment and work and assembly stations.
-
TPA – Wheels
The wheels in the TPA series come in sizes ranging between 2 and 8 inch as standard and are combined with a ball bearing or plain bore. Electrically conductive wheels in non-marking gray and wheels with ball bearing seals are also available.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]TPA 50/8G 2 ³⁄₄ 110 plain bore ⁵⁄₁₆ ⁷⁄₈ To the product TPA 50/6KF 2 ³⁄₄ 110 ball bearing (C) ¹⁄₄ ⁷⁄₈ To the product TPA 75/8G 3 1 165 plain bore ⁵⁄₁₆ 1 ³⁄₁₆ To the product TPA 75/6KF 3 1 165 ball bearing (C) ¹⁄₄ 1 ¹⁄₄ To the product TPA 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore ¹⁄₂ 1 ³⁄₈ To the product TPA 80/8KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ To the product TPA 100/8G 4 1 200 plain bore ⁵⁄₁₆ 1 ³⁄₁₆ To the product TPA 101/12G 4 1 ¹⁄₄ 245 plain bore ¹⁄₂ 1 ³⁄₈ To the product TPA 101/8KF 4 1 ¹⁄₄ 245 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ To the product TPA 102/10KF 4 1 ¹⁄₄ ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ To the product TPA 126/12G 5 1 ¹⁄₄ 275 plain bore ¹⁄₂ 1 ³⁄₈ To the product TPA 126/8KF 5 1 ¹⁄₄ 275 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ To the product TPA 127/10KF 5 1 ¹⁄₄ ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ To the product TPA 160/12KA 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ ball bearing (C) ¹⁄₂ 2 ⁷⁄₁₆ To the product TPA 200/12KA 8 1 ⁹⁄₁₆ ball bearing (C) ¹⁄₂ 2 ⁷⁄₁₆ To the product -
TPA – Swivel casters with plate
As standard, the TPA wheels are available with various rig series with a top plate fitting. The following rigs are available to suit different wheel sizes or load capacity requirements:
LPA/LKPA series: Light duty swivel rig with top plate fitting
A detailed description of this rig series is available in the guide. The brake systems for each base product are listed after you make your selection.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LPA-TPA 50G 2 ³⁄₄ 110 plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ To the product LPA-TPA 50KF 2 ³⁄₄ 110 ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ To the product LPA-TPA 75G 3 1 165 plain bore 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ To the product LPA-TPA 75KF 3 1 165 ball bearing (C) 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ To the product LKPA-TPA 80G-12 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 80KF-12 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LPA-TPA 100G 4 1 155 plain bore 4 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ⁵⁄₁₆ To the product LKPA-TPA 101G-12 4 1 ¹⁄₄ 245 plain bore 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 101G 4 1 ¹⁄₄ 245 plain bore 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 101KF-12 4 1 ¹⁄₄ 245 ball bearing (C) 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 101KF 4 1 ¹⁄₄ 245 ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 126G-12 5 1 ¹⁄₄ 265 plain bore 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 126G 5 1 ¹⁄₄ 265 plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 126KF-12 5 1 ¹⁄₄ 265 ball bearing (C) 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPA-TPA 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product -
TPA – Swivel casters with bolt hole
The swivel casters of the TPA series are available with a bolt hole fitting as an alternative to other fitting types.
LRA/LKRA series: Light duty swivel rig with bolt hole
A detailed description of this rig series is available in the guide. The brake system versions for each base product are covered in greater detail in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LRA-TPA 50G 2 ³⁄₄ 110 plain bore 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ To the product LRA-TPA 50KF 2 ³⁄₄ 110 ball bearing (C) 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ To the product LRA-TPA 75G 3 1 165 plain bore 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ 1 ¹⁄₈ To the product LKRA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-TPA 80KF-11 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LRA-TPA 100G 4 1 155 plain bore 4 ³⁄₄ 1 ¹¹⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆ To the product LKRA-TPA 101G 4 1 ¹⁄₄ 245 plain bore 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-TPA 101G-11 4 1 ¹⁄₄ 245 plain bore 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-TPA 101KF 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-TPA 101KF-11 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-TPA 126G 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-TPA 126G-11 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-TPA 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-TPA 126KF-11 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product -
TPA – Swivel casters with threaded pin
Wheels in the TPA series can be combined with a swivel rig with a threaded pin fitting type:
LRA/LKRA series: Light duty swivel rig with threaded pin
A description of the LRA and LKRA rigs is available in the guide. Suitable brake systems for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Thread
Pin
length
[inch]Offset
[inch]LRA-TPA 50G-GS10 2 ³⁄₄ 110 plain bore 2 ¹¹⁄₁₆ M10 1 ³⁄₁₆ ⁷⁄₈ To the product LRA-TPA 50KF-GS10 2 ³⁄₄ 110 ball bearing (C) 2 ¹¹⁄₁₆ M10 1 ³⁄₁₆ ⁷⁄₈ To the product LRA-TPA 75G-GS10 3 1 165 plain bore 3 ⁷⁄₈ M10 1 ³⁄₁₆ 1 ¹⁄₈ To the product LRA-TPA 75KF-GS10 3 1 165 ball bearing (C) 3 ⁷⁄₈ M10 1 ³⁄₁₆ 1 ¹⁄₈ To the product LKRA-TPA 80G-GS12 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-TPA 80KF-GS12 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LRA-TPA 100G-GS10 4 1 155 plain bore 4 ³⁄₄ M10 1 ³⁄₁₆ 1 ⁵⁄₁₆ To the product LKRA-TPA 101G-GS12 4 1 ¹⁄₄ 245 plain bore 5 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-TPA 101KF-GS12 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-TPA 126G-GS12 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-TPA 126KF-GS12 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product -
TPA – Swivel casters with plug-in stem
Swivel casters with a plug-in stem are another rig version for the TPA series:
LRA series: Light duty swivel rig with plug-in stem
Refer to our guide for more information about this rig series. The brake systems available for each base product are provided in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Pin Ø
[inch]Pin
length
[inch]Offset
[inch]LRA-TPA 50G-ES 2 ³⁄₄ 110 plain bore 2 ¹¹⁄₁₆ ⁷⁄₁₆ 1 ³⁄₁₆ ⁷⁄₈ To the product LRA-TPA 50KF-ES 2 ³⁄₄ 110 ball bearing (C) 2 ¹¹⁄₁₆ ⁷⁄₁₆ 1 ³⁄₁₆ ⁷⁄₈ To the product LRA-TPA 75G-ES 3 1 165 plain bore 3 ⁷⁄₈ ⁷⁄₁₆ 1 ³⁄₁₆ 1 ¹⁄₈ To the product LRA-TPA 75KF-ES 3 1 165 ball bearing (C) 3 ⁷⁄₈ ⁷⁄₁₆ 1 ³⁄₁₆ 1 ¹⁄₈ To the product LRA-TPA 100G-ES 4 1 155 plain bore 4 ³⁄₄ ⁷⁄₁₆ 1 ³⁄₁₆ 1 ⁵⁄₁₆ To the product -
TPA – Rigid casters
The TPA series is available with rigid rigs:
BPA/BKPA series: Light duty rigid rig with top plate fitting
BRA/BKRA series: Light duty rigid rig with bolt holeThe specific features of each rig series are covered in detail in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]BPA-TPA 50G 2 ³⁄₄ 110 plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRA-TPA 50G 2 ³⁄₄ 110 plain bore 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPA-TPA 50KF 2 ³⁄₄ 110 ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRA-TPA 50KF 2 ³⁄₄ 110 ball bearing (C) 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPA-TPA 75G 3 1 165 plain bore 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRA-TPA 75G 3 1 165 plain bore 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPA-TPA 75KF 3 1 165 ball bearing (C) 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRA-TPA 75KF 3 1 165 ball bearing (C) 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ To the product BKPA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKPA-TPA 80G-12 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKRA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKPA-TPA 80KF-12 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKRA-TPA 80KF 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-TPA 101G 4 1 ¹⁄₄ 245 plain bore 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKPA-TPA 101G-12 4 1 ¹⁄₄ plain bore 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKRA-TPA 101G 4 1 ¹⁄₄ 245 plain bore 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-TPA 101KF 4 1 ¹⁄₄ 245 ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKPA-TPA 101KF-12 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKRA-TPA 101KF 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-TPA 126G 5 1 ¹⁄₄ 265 plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKPA-TPA 126G-12 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKRA-TPA 126G 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-TPA 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKPA-TPA 126KF-12 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKRA-TPA 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product -
TPA – Twin casters
The TPA series is available as a twin caster with the following rig series:
LDA series: Light duty twin wheel swivel rig with top plate fitting
LMDA series: Light duty twin wheel swivel rig with bolt holeA detailed description of the differences between the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Number of
wheels
Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LDA-TPA 50G 2 ³⁄₄ 2 175 plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₄ To the product LMDA-TPA 50G 2 ³⁄₄ 2 175 plain bore 2 ¹³⁄₁₆ 1 ⁵⁄₈ ³⁄₈ 1 ¹⁄₄ To the product LDA-TPA 50KF 2 ³⁄₄ 2 175 ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₄ To the product LMDA-TPA 50KF 2 ³⁄₄ 2 175 ball bearing (C) 2 ¹³⁄₁₆ 1 ⁵⁄₈ ³⁄₈ 1 ¹⁄₄ To the product LDA-TPA 75G 3 1 2 220 plain bore 4 2 ³⁄₈ x 2 ³⁄₈ 1 9/16 x 1 9/16 / 1 13/16 x 1 13/16 1 ⁵⁄₁₆ To the product LMDA-TPA 75G 3 1 2 220 plain bore 3 ⁷⁄₈ 2 ³⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆ To the product LDA-TPA 75KF 3 1 2 220 ball bearing (C) 4 2 ³⁄₈ x 2 ³⁄₈ 1 9/16 x 1 9/16 / 1 13/16 x 1 13/16 1 ⁵⁄₁₆ To the product LMDA-TPA 75KF 3 1 2 220 ball bearing (C) 3 ⁷⁄₈ 2 ³⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆ To the product