VSTH – Wheel and caster series
Heavy duty wheels and casters with Blickle Extrathane® polyurethane tread and steel wheel center
The tread of the VSTH series consists of the high-quality polyurethane Blickle Extrathane® and has a hardness of 92 Shore A. This is cast onto the steel wheel center. The tread is particularly resistant to sharp obstacles.
Thanks to its robust design, the VSTH series is also suitable for carrying heavy loads, even with a very small wheel diameter. These are listed in the Compact casters section.
-
VSTH – Wheels
Wheels in the VSTH series have diameters ranging between 1 ³⁄₈ and 3 ¹⁄₈ inch. The wheels use a ball bearing.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]VSTH 35/6K 1 ³⁄₈ 1 ¹⁄₁₆ 220 ball bearing ¹⁄₄ 1 ³⁄₁₆ To the product VSTH 50/8K 2 1 ⁵⁄₁₆ 330 ball bearing ⁵⁄₁₆ 1 ⁷⁄₁₆ To the product VSTH 60/15K 2 ³⁄₈ 1 ³⁄₈ 440 ball bearing ⁹⁄₁₆ 1 ³⁄₈ To the product VSTH 62/10K 2 ³⁄₈ 2 ³⁄₈ 705 ball bearing ³⁄₈ 2 ³⁄₈ To the product VSTH 65/15K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ 550 ball bearing ⁹⁄₁₆ 1 ⁹⁄₁₆ To the product VSTH 75/20K 3 1 ⁹⁄₁₆ 595 ball bearing ¹³⁄₁₆ 1 ⁹⁄₁₆ To the product VSTH 80/20K 3 ¹⁄₈ 1 ⁹⁄₁₆ 615 ball bearing ¹³⁄₁₆ 1 ⁹⁄₁₆ To the product VSTH 82/20K 3 ¹⁄₈ 2 ³⁄₄ 1,100 ball bearing ¹³⁄₁₆ 2 ³⁄₄ To the product -
VSTH – Swivel casters with plate
Wheels in the VSTH series are available with the LH pressed steel rig as swivel casters with a plate fitting:
LH series: Pressed steel swivel rig with top plate fitting, heavy duty design
A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LH-VSTH 62K 2 ³⁄₈ 2 ³⁄₈ 705 ball bearing 3 ⁵⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ To the product LH-VSTH 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 615 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ To the product LH-VSTH 82K 3 ¹⁄₈ 2 ³⁄₄ 1,100 ball bearing 4 ⁷⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₄ To the product -
VSTH – Rigid casters
Blickle also provides casters with rigid rigs corresponding to the pressed steel swivel caster:
BH series: Pressed steel rigid rig with top plate fitting, heavy duty design
A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BH-VSTH 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 615 ball bearing 4 ³⁄₄ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product -
VSTH – Twin casters
The wheels in the VSTH series can be provided as twin casters in combination with the following rig types:
LOD series: Heavy duty welded steel swivel rig with top plate fitting
BOD series: Heavy duty welded steel rigid rig with top plate fitting
LSD series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head
BSD series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty designThe differences between each rig series are covered in detail in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Number of
wheels
Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]BOD-VSTH 75K 3 1 ⁹⁄₁₆ 2 1,100 ball bearing 4 ¹³⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product LOD-VSTH 75K 3 1 ⁹⁄₁₆ 2 1,100 ball bearing 4 ¹³⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁹⁄₁₆ To the product BSD-VSTH 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 2 1,145 ball bearing 4 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product LSD-VSTH 80K 3 ¹⁄₈ 1 ⁹⁄₁₆ 2 1,145 ball bearing 4 ¹⁵⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 1 ⁹⁄₁₆ To the product