LEX-POEV 200KAD-1-SG
(LEX-POEV 200KD-1-SG)
EAN 4047526582791
ID 582791
Customs tariff number 87169090
ID 582791
Customs tariff number 87169090
Stainless steel swivel caster, with top plate fitting, heavy duty wheel, with “Blickle EasyRoll” elastic solid rubber tires, with nylon wheel center, non-marking, gray, with synthetic thr ead guard, small, with additionals ball bearing seals
rig: LEX series
- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- all parts including axle material are corrosion-resistant
- double ball bearing in the swivel head
- swivel head seal
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: POEV series
- tire: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, color gray, non-marking
- wheel center: high-quality nylon 6, impact resistant, color black
- small thread guard, with additional, ball bearing seal
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -5 °F to +175 °F, temporarily up to +210 °F, reduced load capacity over +95 °F
LEX-POEV 200KAD-1-SG
(LEX-POEV 200KD-1-SG)
EAN 4047526582791
ID 582791
Customs tariff number 87169090
ID 582791
Customs tariff number 87169090
Stainless steel swivel caster, with top plate fitting, heavy duty wheel, with “Blickle EasyRoll” elastic solid rubber tires, with nylon wheel center, non-marking, gray, with synthetic thr ead guard, small, with additionals ball bearing seals
rig: LEX series
- high-quality chromium-nickel steel (1.4301/AISI 304), stainless steel, vibration-ground finishing
- all parts including axle material are corrosion-resistant
- double ball bearing in the swivel head
- swivel head seal
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: POEV series
- tire: high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A, color gray, non-marking
- wheel center: high-quality nylon 6, impact resistant, color black
- small thread guard, with additional, ball bearing seal
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -5 °F to +175 °F, temporarily up to +210 °F, reduced load capacity over +95 °F
Rolling resistance
very good
Operating noise / floor surface preservation
very good
Tread and tire hardness
65 Shore A
Wear resistance
good
-
Technical Data
-
CAD downloads
| Wheel Ø (D) | 8 inch | |
| Wheel width | 2 inch | |
| Load capacity at 2.5 mph | 660 lbs | |
| Load capacity (static) | 1,655 lbs | |
| Bearing type | ball bearing (CC) | |
| Total height (H) | 9 ¹⁄₄ inch | |
| Plate size | 3 ¹⁵⁄₁₆ x 3 ³⁄₈ inch | |
| Bolt hole spacing | 3 5/32 x 2 3/8 inch | |
| Bolt hole Ø | ⁵⁄₁₆ inch | |
| Offset (F) | 2 ¹⁄₈ inch | |
| Temperature resistance min | -15 °F | |
| Temperature resistance max | 160 °F | |
| Tread and tire hardness | 65 Shore A | |
| Unit weight | 4.4 lbs | |
| Non-marking | ||
| Non-staining | ||
| Antistatic | ||
| Electrically conductive | ||
| Corrosion-resistant | ||
| Heat-resistant | ||
| Tread hydrolysis-resistant | ||
| Suitable for autoclaves | ||
| Suitable for machine washing |
Please log in for download with your registered email address.
