L-GSPO 60K-RA
EAN 4047526359928
ID 937228
Customs tariff number 83022000
ID 937228
Customs tariff number 83022000
Pressed steel swivel caster, medium duty design, with top plate fitting, with brake system 'Radstop', heavy duty wheel made of compressed cast nylon
rig: L series
- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin (from wheel Ø 150 mm)
- swivel head seal
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: GSPO series
- high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, color natural beige
- high chemical resistance to many aggressive substances
- reduced moisture absorption
- operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
- consider the surface pressure on sensitive floors due to high point loads
- Test in compliance with DIN 12530 with extended breaks to avoid thermal overloading
L-GSPO 60K-RA
EAN 4047526359928
ID 937228
Customs tariff number 83022000
ID 937228
Customs tariff number 83022000
Pressed steel swivel caster, medium duty design, with top plate fitting, with brake system 'Radstop', heavy duty wheel made of compressed cast nylon
rig: L series
- pressed steel, zinc-plated, blue-passivated, Cr6-free
- double ball bearing in the swivel head
- strong central kingpin (from wheel Ø 150 mm)
- swivel head seal
- minimum swivel head play and smooth rolling characteristic and increased service life due to the special dynamic Blickle riveting process
Wheel: GSPO series
- high-quality cast nylon, reaction-injected, impact resistant, hardness 80 Shore D, color natural beige
- high chemical resistance to many aggressive substances
- reduced moisture absorption
- operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
- consider the surface pressure on sensitive floors due to high point loads
- Test in compliance with DIN 12530 with extended breaks to avoid thermal overloading
Rolling resistance
excellent
Operating noise / floor surface preservation
satisfactory
Tread and tire hardness
80 Shore D
Wear resistance
very good
-
Technical Data
-
CAD downloads
| Wheel Ø (D) | 2 ³⁄₈ inch | |
| Wheel width | 1 ¹⁄₄ inch | |
| Load capacity at 1.9 mph | 550 lbs | |
| Load capacity at 2.5 mph | 550 lbs | |
| Load capacity (static) | 1,380 lbs | |
| Bearing type | ball bearing | |
| Total height (H) | 3 ¹⁄₈ inch | |
| Plate size | 3 ¹⁵⁄₁₆ x 3 ³⁄₈ inch | |
| Bolt hole spacing | 3 5/32 x 2 3/8 inch | |
| Bolt hole Ø | ⁵⁄₁₆ inch | |
| Offset (F) | 1 ³⁄₈ inch | |
| Temperature resistance min | -5 °F | |
| Temperature resistance max | 160 °F | |
| Tread and tire hardness | 80 Shore D | |
| Unit weight | 1.5 lbs | |
| Non-marking | ||
| Non-staining | ||
| Antistatic | ||
| Electrically conductive | ||
| Corrosion-resistant | ||
| Heat-resistant | ||
| Tread hydrolysis-resistant | ||
| Suitable for autoclaves | ||
| Suitable for machine washing |
Please log in for download with your registered email address.
