ALES 150/20XK-SG
ID 932327
Customs tariff number 87169090
Customs tariff number 87169090
Wheel with “Blickle SoftMotion” soft rubber tire, with aluminum wheel center, non-marking, gray
tire:
- high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A
- excellent floor preservation, particularly quiet operation
- low rolling resistance
- color gray, non-marking
- vulcanised onto the wheel center
- die-cast aluminium
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -5 °F to +175 °F, temporarily up to +210 °F, reduced load capacity over +140 °F
ALES 150/20XK-SG
ID 932327
Customs tariff number 87169090
Customs tariff number 87169090
Wheel with “Blickle SoftMotion” soft rubber tire, with aluminum wheel center, non-marking, gray
tire:
- high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A
- excellent floor preservation, particularly quiet operation
- low rolling resistance
- color gray, non-marking
- vulcanised onto the wheel center
- die-cast aluminium
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -5 °F to +175 °F, temporarily up to +210 °F, reduced load capacity over +140 °F
Rolling resistance
very good
Operating noise / floor surface preservation
excellent
Tread and tire hardness
55 Shore A
Wear resistance
good
-
Technical Data
-
CAD downloads
| Wheel Ø (D) | 6 inch | |
| Wheel width | 2 inch | |
| Load capacity at 2.5 mph | 615 lbs | |
| Load capacity at 3.7 mph | 615 lbs | |
| Load capacity at 6.2 mph | 485 lbs | |
| Bearing type | ball bearing | |
| Axle bore Ø (d) | ¹³⁄₁₆ inch | |
| Hub keyway (T1) | 2 ³⁄₈ inch | |
| Temperature resistance min | -5 °F | |
| Temperature resistance max | 175 °F | |
| Tread and tire hardness | 55 Shore A | |
| Unit weight | 2.4 lbs | |
| Non-marking | ||
| Non-staining | ||
| Antistatic | ||
| ProductDetail.TechnicalData.Esd | ||
| Electrically conductive | ||
| Corrosion-resistant | ||
| Heat-resistant | ||
| Tread hydrolysis-resistant | ||
| Suitable for autoclaves |
Please log in for download with your registered email address.