Set add-on
ErgoMove® 1000 options
A variety of options are also available for the ErgoMove® 1000.
In addition to solutions which improve the safety of the system, a variety of fitting aids are also available.
-
Foot guard
Upgradable foot guard for 160 mm and 190 mm wheel Ø for preventing foot injuries.
- Pressed steel zinc-plated, blue-passivated
Three M6x12 bolts are required for assembly. These are not included.
-
Motor cover
Motor cover for protection against impact and other mechanical damage. Additional protection for the user against the heat of the electric motor.
- Pressed steel zinc-plated, blue-passivated
Three M6x12 bolts are required for assembly. These are not included.
-
Charger
Charger for two batteries of the ErgoMove® 1000.
- Charge two batteries at once to keep things moving
- Situational charging cycles for extended battery life
- Smart charging for maximum safety
- Constant monitoring for optimised charging
- Integrated lifting eyes for wall mounting
-
Spare battery
Replaceable 18V - 5.2 Ah battery for ErgoMove® 1000
- Proactive battery management system for maximum safety
- Situational charging cycles for extended battery life
- Integrated three-stage LED charge level display
- High-quality lithium-ion cells which do not self-discharge
- Rubberised housing for impact protection
- Recessed grip for ergonomic handling
-
Extension cable
Extension cable for ErgoMove® 1000 with socket and plug.
- Rugged zinc die-cast socket and plug, nickel-coated
- Bayonet connector for easy plug and play installation
- Flame-resistant, self-extinguishing cable in accordance with IEC 60332-1-2
-
Console extension
Console extension for ErgoMove® 1000, for extending the handrail under the ergonomic handle with force sensor.
- Lacquered, black RAL 9005
- Operating height adapted to meet ergonomic standards
- Screw connection between cockpit and console extension
-
Base plate
Base plate 140 x 110 x 8 mm/105 x 75-80 mm for ErgoMove® 1000 with cut-out for cable
- Raw steel
- For attaching the ergonomic handle with force sensor or console extension
- Can be welded onto the frame of the trolley
- Cable cut-out for easy routing
-
Projecting base plate
Base plate 160 x 160 x 8 mm for ErgoMove® 1000 with cut-out for cable
- Zinc-plated, blue-passivated steel
- For attaching the ergonomic handle with force sensor or console extension with a projection
- Can be bolted onto the frame of the trolley
- Cable cut-out for easy routing
-
Cockpit adapter for ergonomic handle with rotary joysticks
Cockpit adapter for attaching the ergonomic handle with rotary joysticks to the console extension.
- Zinc-plated, blue-passivated steel
- Can be bolted onto the console extension
- Ergonomic handle with rotary joysticks can be fitted with pipe clamps
-
Replaceable battery anti-theft systemAnti-theft system for the replaceable batteries of the ErgoMove® 1000.